Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Door pockets/consoles
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Door pockets/consoles
A couple of years ago I saw some excellent door pockets to suit my 75 series Cruiser. Regretably I did not purchase them at the time. They had a speaker moulding at the front to take about a six inch round speaker and an open topped pocket back along the rest of the door bottom.They sold for about $150 a pair at the time. I believe they were produced in Albury. I have been trying to find them now and have not had any luck. The closest I can find is custom made from Department of the Interior at about $250 each side. Does anyone know if you can still get them and where? Much appreciated.
Last edited by Dane on Thu Nov 09, 2006 2:16 pm, edited 1 time in total.
Have a look at www.consoles.com they are in sydney, they have heaps of different product to suit just about everything, but they are expensive.
I've taken my door/map pockets off both my Rocky and my Corolla to fit speakers in the doors instead...
In saying that, try wreckers for pockets from other vehicles. Most have them like Commodores and Rockys and Corollas obviously.
They are plastic, and you screw through the door trim into the pocket and are very easy to install.
In saying that, try wreckers for pockets from other vehicles. Most have them like Commodores and Rockys and Corollas obviously.
They are plastic, and you screw through the door trim into the pocket and are very easy to install.
In the (I think) July 2006 issue of Street Machine (yeah... gimme a break...) there was an article on how the guys made the speaker pods for their competition car using MDF as a base that was fibreglassed over - messy stuff, but not particularly hard. You could then either paint it (if you get them smooth enough) or upholster them as they did.
The MDF seemed like a bad idea in a convertible when I first saw it (the competition car was a ford Galaxie) but I guess that it would have been sealed pretty well. I don't mind scanning the article and emailing it - I dont think it would be a great idea to post it due to copyright blah blah or I could summarise what they did over the weekend when I get time - PM me if you want a scan, bear in mind that it's a few pages and I only have dialup so it may be too big for me to email.
Basically, it might be a good idea if you're a bit handy - shouldn't be too exxy and you could upholster them and design them any way you want.
Nick.
The MDF seemed like a bad idea in a convertible when I first saw it (the competition car was a ford Galaxie) but I guess that it would have been sealed pretty well. I don't mind scanning the article and emailing it - I dont think it would be a great idea to post it due to copyright blah blah or I could summarise what they did over the weekend when I get time - PM me if you want a scan, bear in mind that it's a few pages and I only have dialup so it may be too big for me to email.
Basically, it might be a good idea if you're a bit handy - shouldn't be too exxy and you could upholster them and design them any way you want.
Nick.
Thanks for the input lads, some good ideas there.
Bazzle - I like the sound the sound of the six can console fridge, it would be a great addition.
nickw86au - I was considering doing something like that if I can't buy what I want at a reasonable price as I have some fibreglassing experience. Some marine carpet over the fibreglass would be pretty neat I reckon.
4sum4 - They are a neat door pocket at a great price, half what the shops want for a very similar item. However they don't have the speaker moulding that I am particuarly keen on.
HotFourOk - I will check out the commodore ones on the girl's VS, good idea.
phippsy - I will check out the local equivelant and see what they have.
Cheers.
Bazzle - I like the sound the sound of the six can console fridge, it would be a great addition.
nickw86au - I was considering doing something like that if I can't buy what I want at a reasonable price as I have some fibreglassing experience. Some marine carpet over the fibreglass would be pretty neat I reckon.
4sum4 - They are a neat door pocket at a great price, half what the shops want for a very similar item. However they don't have the speaker moulding that I am particuarly keen on.
HotFourOk - I will check out the commodore ones on the girl's VS, good idea.
phippsy - I will check out the local equivelant and see what they have.
Cheers.
Who is online
Users browsing this forum: No registered users and 3 guests