Just wondering if anyone with a Defender has ever had a baby seat fitted? Just planning ahead, and wondering if it's possible. I'm not sure about the rules and regulations for NSW for child restraint mounts.
If anyone could provide me with any information it would be a great help, thanks.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Babyseat in Defender
Moderator: Micka
maybe something like this?
http://www.aulro.com/apc/showproduct.ph ... =401&cat=6
Few things around, I have a bar that fits across the back with a babyseat attachment clip thing on it.
Luke
http://www.aulro.com/apc/showproduct.ph ... =401&cat=6
Few things around, I have a bar that fits across the back with a babyseat attachment clip thing on it.
Luke
i run the straps through a rated cargo barrier and down to the floor ( a plated bolt ) this seems to hold the seat very firm. i want to put a full length draw in one day and will probably use a piece of unistrut or angle across the wheel boxes. i believe black widow do an 'approved' 
cargo barrier and rear draw combination for fenders, just make sure you are sitting down when you ask for a price 
i say bolts is bolts, just make it strong.
david
cargo barrier and rear draw combination for fenders, just make sure you are sitting down when you ask for a price i say bolts is bolts, just make it strong.
david
Who is online
Users browsing this forum: No registered users and 3 guests