Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Q's On Performance Computers for 3.9L Disco's??????

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
User avatar
POS
Posts: 4318
Joined: Tue Oct 22, 2002 8:52 pm
Location: Perth

Q's On Performance Computers for 3.9L Disco's??????

Post by POS »

I have read about people using Perfomance Upgrade Chips or comps to not only gain power but to improve fuel economy!!

Has anyone or do you know of anyone that has used these???

My main point of interest is Fuel Economy!

Is there a Dramatic effect on the fuel savings?????

and how much are these and is there any other mods required eg. Larger exhaust etc etc?????????

Oh the extra grunt is also a bonus! ;) ;) ;)
Top
User avatar
POS
Posts: 4318
Joined: Tue Oct 22, 2002 8:52 pm
Location: Perth

Post by POS »

By the way, i do realise that there will be no improvement in the fuel economy if i use the new found power and drive like Peter Brock.

My missus uses the Disco more than i do and she drives very conservativly (sp) :)
Top
Posts: 2979
Joined: Mon Feb 24, 2003 7:03 pm
Location: Melbourne

Post by robbie »

I dont know about the computer bit, but I have heard extractors and a good free flowing (mandrel bent) exhaust generall improve power and fuel economy
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

:D
Last edited by bazzle on Wed Sep 17, 2003 8:02 am, edited 1 time in total.
Top
Posts: 2979
Joined: Mon Feb 24, 2003 7:03 pm
Location: Melbourne

Post by robbie »

bazzle wrote:""I dont know about the computer bit, but I have heard extractors and a good free flowing (mandrel bent) exhaust generall improve power and fuel economy""


I just love these posters who post nothing at all to help the thread , only bullshit I heard stories..

Bazzle


dude, dont be a gay prick.. if you read his original post, you will realise he asked:

"and how much are these and is there any other mods required eg. Larger exhaust etc etc?????????"

so bazzle..

Image
Top
Posts: 2979
Joined: Mon Feb 24, 2003 7:03 pm
Location: Melbourne

Post by robbie »

oh bazzle, before I forget..

how did you find out about any mod you have done to your car? word of mouth, or you have heard some stories? I'm sure you have heard a story where something does x or y and you go and get it..

I'm pretty darned sure that you aren't some supernatural type of person who can foresee what something does before you buy it?

ftard..
Top
Posts: 1119
Joined: Mon Dec 16, 2002 4:24 pm
Location: Neither here nor there

Post by TuffRR »

Rules of posting: All flaming must be accompanied by a :finger:

























:finger:
Top
Posts: 1057
Joined: Mon Feb 10, 2003 12:28 pm
Location: Eastern Sector

Post by mickrangie »

:rofl:

Back to the original thread....

I used to have a 97 Subaru RX and had a Wolf 3D installed in it.
I can honestly say that it was farking cool I used to get about 400 (city) – 600 (hway) Ks from a 60L tank on the original ECU after the wolf install I think the best I got was close to 800k in the highway and about 500 in the city the problem was the extra power was so much fun so the economy side went out the window!!

Now I know Bazzel you can’t compare a 2l 4clyn to 4l v8……. But do the math it all works in the economy favour as long as you drive to suit!!

When I have time and money the wolf ECU that was in the Subaru is going in my Rangie 3.9L V8
Top
User avatar
POS
Posts: 4318
Joined: Tue Oct 22, 2002 8:52 pm
Location: Perth

Post by POS »

Thanks!

The extractors is a good idea!

Does anyone know who produces computers for rangies here in OZ?????

Thanks guys!
Top
Posts: 1606
Joined: Sat Oct 26, 2002 7:20 pm
Location: Geelong

Contact:
Contact HSV Rangie

Post by HSV Rangie »

I believe john davis motor works do Sydney.

Motec, haltec, wolf :D

Michael.
Mitsubishi 2010 NT DID Pajero wagon, Factory rear diff lock, Dual batteries, ARB bar, winch, Mt ATZ 4 rib tyres.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
Top
Posts: 1559
Joined: Sun Nov 03, 2002 2:35 pm
Location: Captain Creek QLD

Post by Bush65 »

HSV Rangie wrote:I believe john davis motor works do Sydney.

Motec, haltec, wolf :D

Michael.


John and Bruce Davis split up. John is concentrating on building falcon hunting vehicles, active suspension etc. Bruce has the rover servicing and performance mods side of the business, Bruce Davis Performance Landy's (02) 9679 1978
John
Top
User avatar
POS
Posts: 4318
Joined: Tue Oct 22, 2002 8:52 pm
Location: Perth

Post by POS »

Cool :cool:

Thanks guys!
Top
Posts: 1404
Joined: Tue Jan 07, 2003 9:20 pm
Location: Sitting on Miss Janes lap.

Post by Drafty »

When l saw this topic l got excited, thought you were going to ugrade the motor in the POS :roll:
Joe.


To succeed, focus on the solution, not the problem.
Top
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

Hey can anyone back this post up more and maybe con me into getting a chip?
I have an 88-89 3.5efi with Extractors and mandrel bent exhaust which helped my economy a far bit (I run premium) I have herd that a chip acompanied with what i already got is a great combo ( is this true ) I want to be able to get 500k constantly out of my 80L tank (so far best i have got is about 450 or abit more)

ChipTorque is just down the road from me and they have chips for my engine....... anyone got any comments on them?

SORRY to but in on your post POS (i didnt wanna start a new one cause i probably get told to visit this one) :D
Top
User avatar
POS
Posts: 4318
Joined: Tue Oct 22, 2002 8:52 pm
Location: Perth

Post by POS »

AnthonyP wrote:Hey can anyone back this post up more and maybe con me into getting a chip?
I have an 88-89 3.5efi with Extractors and mandrel bent exhaust which helped my economy a far bit (I run premium) I have herd that a chip acompanied with what i already got is a great combo ( is this true ) I want to be able to get 500k constantly out of my 80L tank (so far best i have got is about 450 or abit more)

ChipTorque is just down the road from me and they have chips for my engine....... anyone got any comments on them?

SORRY to but in on your post POS (i didnt wanna start a new one cause i probably get told to visit this one) :D


Nah, its cool.

same sort of stuff really!
Top
Posts: 2
Joined: Sat Sep 13, 2003 11:15 am
Location: Bolton Point, Newcastle Aust

Computer for Rangies in OZ !!

Post by Zorba »

POS wrote:Thanks!

The extractors is a good idea!

Does anyone know who produces computers for rangies here in OZ?????

Thanks guys!



G'day POS

Have a look at the Megasquirt DIY computer system that you build yourself from components you buy in kit form. For about $200 AUD it seems to be worth considering. There is a web site, a forum & mailing list and the group appears to be very friendly and willing to help.
The site is at : http://au.groups.yahoo.com/group/oz_ms/
I've ordered my kit through a 'group buy' which saves a fair bit of $$$.
Haven't received it yet but am looking forward to building it and putting it into the 'NR' (see at http://mediaservice.photoisland.com/auc ... 992194.jpg)
Top
Posts: 1057
Joined: Mon Feb 10, 2003 12:28 pm
Location: Eastern Sector

Post by mickrangie »

AnthonyP wrote:Hey can anyone back this post up more and maybe con me into getting a chip?
I have an 88-89 3.5efi with Extractors and mandrel bent exhaust which helped my economy a far bit (I run premium) I have herd that a chip acompanied with what i already got is a great combo ( is this true ) I want to be able to get 500k constantly out of my 80L tank (so far best i have got is about 450 or abit more)

ChipTorque is just down the road from me and they have chips for my engine....... anyone got any comments on them?

SORRY to but in on your post POS (i didnt wanna start a new one cause i probably get told to visit this one) :D


IMHO...

'Piggyback Chips' are CRAP!!

they trick yr std ECU and don't have as much play for Fuel/air mixtures...

and for the cost of them about 1K go the extra and do it once and do it properly!!!

Best of all with an after market ECU (not piggcrap) Sir Lucas can go suck himself cause you don't need the air flow meter anymore!!!

My 3 cents!!
Top
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

ok well that was very helpful I didnt even no there was a difference :oops:
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 31 guests