Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GQ Front drivers side chassis rail

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 88
Joined: Thu Nov 02, 2006 8:26 am
Location: Brisbane

GQ Front drivers side chassis rail

Post by AussieGQ »

Hi guys, I pulled the alloy bar off the front of my GQ today and noticed that the chassis rail on the drivers side has a plate spot welded in with 3 nuts pressed on.
There isn't one on the passenger side so I'm wondering if this is standard?

Thanks
Shane

91 LWB GQ TD42, Recaro Seats, Tait T2020 UHF, Tait TM8255 Trunk, 3" Lift and 33's. Turbo coming soon :D
Top
Posts: 1153
Joined: Sat Apr 24, 2004 10:17 am
Location: Gold coast QLD

Post by Madmac »

yep its standard, its what they bolt the factory tow/recovery hook too
Top
Posts: 88
Joined: Thu Nov 02, 2006 8:26 am
Location: Brisbane

Post by AussieGQ »

Madmac wrote:yep its standard, its what they bolt the factory tow/recovery hook too
Ahh.. Makes sense :)

Any tips for removing it? :roll: ;)

From what I can see its only held in by 2 spot welds. So I guess just smash a chisel between the rail and the plate?
Shane

91 LWB GQ TD42, Recaro Seats, Tait T2020 UHF, Tait TM8255 Trunk, 3" Lift and 33's. Turbo coming soon :D
Top
Posts: 88
Joined: Thu Nov 02, 2006 8:26 am
Location: Brisbane

Post by AussieGQ »

Oh, thanks for your reply too. Your a champ.
Shane

91 LWB GQ TD42, Recaro Seats, Tait T2020 UHF, Tait TM8255 Trunk, 3" Lift and 33's. Turbo coming soon :D
Top
Posts: 592
Joined: Wed Apr 19, 2006 8:19 pm
Location: ipswich

Post by rover1 »

AussieGQ wrote:


Any tips for removing it? :roll: ;)

From what I can see its only held in by 2 spot welds. So I guess just smash a chisel between the rail and the plate?

dont smash it with a chisel!, it will tear a big hole. just drill out the spot welds, there is 3 of them
cheers Pete.

its the skinny pedal
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 1 guest