Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
i need some help I'm fitting bundera coiled diffs into my lwb suzuki with disco a frame rear, custom rear trailing arms (if posible) , have it all in a swb need to convert them to the lwb need to know whats legal, with engineer of course I want it legal.
also have swb nt body cut down on chassis to be made into a ute if any one is interested it has a red 202 / trimatic with gear reduction its nothing special so dont get to excited
GU Twin cab TD42T compound turbos
lwb sierra ca18det, 37" "CANT HOLD ON"
lwb sierra g16a, daily driver
https://www.suspensionstuff.com.au/shop/
Right.............................?? What do you want to know. You have told us what you are doing, but havent asked any questions. You are going to need custom trailing arms in the rear anyway i think, as from memory the rear is a raduis arm setup, so the standard arms are going to cause issues with a A fram setup. Check at www.pirate4x4.com/foru, in the suzuki section there is a sticky about lux conversions.
Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
if you want to know whats legal. talm to the engineer that you want to do the certificate. that way you know it will all be good. different engineers can be particular about different things.
but I ve seen it done with a mod plate to bloke I meet 4b'n No I didn't get his name etc and I know it may have been a bodgie plate but perhaps it was all good thats what I'm holding onto dont ruin my dream I mean project [/b]
GU Twin cab TD42T compound turbos
lwb sierra ca18det, 37" "CANT HOLD ON"
lwb sierra g16a, daily driver
https://www.suspensionstuff.com.au/shop/
I have a guy that will do the diffs if there on leafs and he said that the guy he goes to for advise would probably approve the coils and a frame but he cant look at til about easter I want it finished by then
GU Twin cab TD42T compound turbos
lwb sierra ca18det, 37" "CANT HOLD ON"
lwb sierra g16a, daily driver
https://www.suspensionstuff.com.au/shop/
(if posible) 
also have swb nt body cut down on chassis to be made into a ute if any one is interested it has a red 202 / trimatic with gear reduction its nothing special so dont get to excited 
[/b]