60 series auto box in a 40 series????????

Post by **turbo4t** » Wed Sep 17, 2003 9:56 am

Has anyone done the above conversion?. If so, what problems did you have?. It doen't look like the vacuum transfer will fit between the chassis rails.

Post by **Wendle** » Wed Sep 17, 2003 10:07 am

Try ringing Darren at Narellan 4x4, he did that exact swap to his own vehicle.

Post by **bj on roids** » Wed Sep 17, 2003 2:01 pm

I thought the auto length became a problem, i have a late model split case between my chassis rails, i think the vacuum shifter is a split case with a vacuum shift actuator, should fit easy if thats the case, length of rear shaft may be an issue.

Post by **turbo4t** » Wed Sep 17, 2003 3:00 pm

The length is no problem as it's a ute that it's going into. The cruiser is a HJ47 which already has a split transfer but the vacuum control assembly sticks out a few inches from the side. Thanks for the replies.

Post by **bj on roids** » Thu Sep 18, 2003 10:13 am

okay, from memory you are around 3 or 4 inches clear so give it a go!

Post by **darrenfj40** » Wed May 24, 2006 6:53 am

Can turbo4t tell me how this worked out as I am looking to fit a 5 speed from a 60 series with vacuum into a fj45. Just need to know if there is enough clearence between the vacuum unit and the chassis rail.

Post by **plowy** » Wed May 24, 2006 7:08 am

pm modified toy as they put a 60 series auto behind a 5ltr injectored windsor in a 40 and no prob with the vacum switch

Post by **darrenfj40** » Thu May 25, 2006 8:20 am

pm modified toy

Outer Limits 4x4 Board

60 series auto box in a 40 series????????

60 series auto box in a 40 series????????

Who is online