What have others done to lift their front shock mounts. I need to lift them as they are restricting travel . 50mm higher would be good but will go more if possible. I have a 70mm BL so there is room.
thanx
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
front shock mounts
front shock mounts
1999 SQ625 Manual Grand Vitara. Lifted, Twin Locked, 31' Extremes, dual Batteries, Winch.
Lots of custom gear as I cant afford the proper stuff.
Lots of custom gear as I cant afford the proper stuff.
Have a search as i have asked it before as well. General info was US use the ford f truck ones but expensive over here.
I was looking at cutting the originals off and mounting them 50mm higher and bracing from the back, looks legal that way also.
I was looking at cutting the originals off and mounting them 50mm higher and bracing from the back, looks legal that way also.
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
I did exactly what Nic said. I also moved them forward so i could move my axle forward at the same time.
I only did it this way as it was cheap. I found it really hard to get in there with a grinder to cut them off though. I ended up getting a mate to cut them off with an oxy.
I only did it this way as it was cheap. I found it really hard to get in there with a grinder to cut them off though. I ended up getting a mate to cut them off with an oxy.
Mud_runner_GQ says:
I need 1.6 metre long shocks
I need 1.6 metre long shocks
been looking at a mates hilux and we are thinking of cutting the suzuki one off and welding in the hilux one as it sits about 3 inches higher.
Will look at other options first .
Does anyone have any pics of what they did?
Will look at other options first .
Does anyone have any pics of what they did?
1999 SQ625 Manual Grand Vitara. Lifted, Twin Locked, 31' Extremes, dual Batteries, Winch.
Lots of custom gear as I cant afford the proper stuff.
Lots of custom gear as I cant afford the proper stuff.
Hey did they come off? Messy or ok, i have an oxy cutter here and chassis is bare at moment,CanberraMav wrote:I did exactly what Nic said. I also moved them forward so i could move my axle forward at the same time.
I only did it this way as it was cheap. I found it really hard to get in there with a grinder to cut them off though. I ended up getting a mate to cut them off with an oxy.
Also how far did u move it forward? 50mm up was ok.
Cheers
Nic
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
The stock towers are a PITA to remove 
and that was without trying to get them off in one piece
here is how my towers looks like, the highest mount possible w/o a BL Had some shorter shocks and they bottomed out on drop
sorry not a good pic
they look like these, and should not be too hard to make
and that was without trying to get them off in one piecehere is how my towers looks like, the highest mount possible w/o a BL Had some shorter shocks and they bottomed out on drop
sorry not a good pic
they look like these, and should not be too hard to make
413TT
413K
413K
Nic
The mounts came off pretty neat. I just tidied them up a bit with a grinder then welded them straight to a flat 4mm (or somewhere around there) piece of steel then welded that to the chassis.
I moved it forward enought that the shock sat straight again when fitted. Depends on how far you are moving your axle forward.
The mounts came off pretty neat. I just tidied them up a bit with a grinder then welded them straight to a flat 4mm (or somewhere around there) piece of steel then welded that to the chassis.
I moved it forward enought that the shock sat straight again when fitted. Depends on how far you are moving your axle forward.
Mud_runner_GQ says:
I need 1.6 metre long shocks
I need 1.6 metre long shocks
Who is online
Users browsing this forum: No registered users and 12 guests