Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Fitting a PTO

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 21
Joined: Mon Jan 10, 2005 3:16 am

Fitting a PTO

Post by Iava64/40 »

Dose anyone know if any landcruiser PTO fit any 40 series landcruiser
Top
Posts: 3725
Joined: Wed Jun 30, 2004 1:45 pm
Location: Blue Mountains, or on a rig somewhere in bumf*ck idaho

Post by rockcrawler31 »

PM dumbdunce off this board. he seems to be the local yota guru.

if he doesn't know then it possible that even mr yota himself doesn't even know :D :lol:
http://www.populationparty.org.au/
Top
Posts: 2765
Joined: Wed Jan 14, 2004 10:32 pm
Location: somewhere out there

Post by shorty_f0rty »

this post might help
http://carl.outerlimits4x4.com/viewtopi ... hlight=pto

i fitted a pto from a hj47 i think and all i needed to do was fiddle with the shaft lengths.

it does the job.
Built, not bought!
'84 BJ42 - sold! :(
'79 Coiled and turbo diesel'd FJ55
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

What transfer you r running is the question, 40/60/80 are all different bolt pattern transfer pto ports, if you match that part the rest can be booty fabbed up.
Andrew
Top
Posts: 860
Joined: Mon Aug 02, 2004 3:11 pm
Location: AUS

Post by scotto »

General rule of thumb is if the bolt pattern on your pto drive is the same as the output plate on the tranny case , it will fit. The majority suit late model split case - the early model ones are a bit harder to find.
My pto came of a 60 - I have late model split case which is the same, so just a matter of shortening the drive shaft. When i bought mine all I did was take the inspection cover plate with me...
www.3rdrock4x4.com
Top
Posts: 21
Joined: Mon Jan 10, 2005 3:16 am

Post by Iava64/40 »

thanks for your help. this save me buying the wrong PTO
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests