Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
80 series side steps
Moderators: toaddog, Elmo, DUDELUX
80 series side steps
Probably an obvious question, but I just want to make sure... will steps from an 80 series GXL fit onto an 80 series Std?
I am pretty sure the standard/dx and rv spec models are missing the 2 centre m8 mounts for the gxl sidesteps.
I tried to fit a set to a mates 95 model RV the other week and this is what i found. The aluminium sidesteps arent very rigid without the 2 middle mounts.
I tried to fit a set to a mates 95 model RV the other week and this is what i found. The aluminium sidesteps arent very rigid without the 2 middle mounts.
If you want a spare 60 for bits-
http://carl.outerlimits4x4.com/viewtopic.php?p=1109227#1109227
http://carl.outerlimits4x4.com/viewtopic.php?p=1109227#1109227
They arnt very rigid with all the mounts anyway. 
They wont fit a DX, RV or getaway without doing a little mod. Better off getting steel ones that clamp to the rails. Only have to space the brake lines (or bend them a little) to get them on.
Jooga
They wont fit a DX, RV or getaway without doing a little mod. Better off getting steel ones that clamp to the rails. Only have to space the brake lines (or bend them a little) to get them on.Jooga
" Some days you are the bug; some days you are the wind screen"
Who is online
Users browsing this forum: No registered users and 15 guests