Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

clutch

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 40
Joined: Tue Jul 18, 2006 3:05 pm
Location: vic

clutch

Post by sickgq »

drivin the other day, went to grab another gear an clutch pedal sank to the floor... Slave cylinder? Any thoughts :?
Top
Posts: 273
Joined: Fri Jul 30, 2004 6:39 pm
Location: cranbourne

Post by embryo »

is it good now?
dont tell the missus
Top
Posts: 297
Joined: Wed Jul 12, 2006 6:32 pm
Location: cranbourne, vic

Post by g60boy »

could be master, slave, hard line or flexi line? they would be best places to start looking.
mq shorty, black, rust free!!, quarter chop, F&R tube bars and sliders, q78's or 33'' stt's, 4.88's with lsd waiting to be thrown in.. :D http://www.patrol4x4.com/forum/showthread.php?t=9540
Top
Posts: 273
Joined: Fri Jul 30, 2004 6:39 pm
Location: cranbourne

Post by embryo »

check fluid replace if required, check fluid leaks at master and slave cyliners, check all lines solid and flexable.

failing that

there is a pin at the top of the peddal that holds the master cylinder rod to the peddal, it has a split pin to stop it falling out, my split pin broke and then the pin fell out. only thing i could find to replace it (without unloading a months worth of camping gear to get to spares box) was a bobby pin in my missus head so i took it, sill going strong nearly 2 years now.

failing that

reco/replace master or slave :armsup:
dont tell the missus
Top
Posts: 63
Joined: Thu Feb 23, 2006 12:08 am
Location: Perth, Western Australia.

Post by itchyvet »

embryo wrote:check fluid replace if required, check fluid leaks at master and slave cyliners, check all lines solid and flexable.

failing that

there is a pin at the top of the peddal that holds the master cylinder rod to the peddal, it has a split pin to stop it falling out, my split pin broke and then the pin fell out. only thing i could find to replace it (without unloading a months worth of camping gear to get to spares box) was a bobby pin in my missus head so i took it, sill going strong nearly 2 years now.

failing that

reco/replace master or slave :armsup:

"a bobby pin in my missus head so i took it, sill going strong nearly 2 years now."
Is it the car that's still going alright or the missus ? HEH!
Gawd, I hope yer missus is alright. :D
Top
Posts: 114
Joined: Tue Jan 17, 2006 10:31 pm
Location: gosford

Post by outback_lux »

i bought a new slave cylinder last week,


:shock: :shock: $130 :shock: :shock:
[quote="bogged"]anyone else get a technochubby reading this?[/quote]
Top
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

outback_lux wrote:i bought a new slave cylinder last week,


:shock: :shock: $130 :shock: :shock:
You got ripped! I paid about $60.
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Top
Posts: 114
Joined: Tue Jan 17, 2006 10:31 pm
Location: gosford

Post by outback_lux »

MKPatrolGuy wrote:
outback_lux wrote:i bought a new slave cylinder last week,


:shock: :shock: $130 :shock: :shock:
You got ripped! I paid about $60.

for what model????
[quote="bogged"]anyone else get a technochubby reading this?[/quote]
Top
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

outback_lux wrote:
MKPatrolGuy wrote:
outback_lux wrote:i bought a new slave cylinder last week,


:shock: :shock: $130 :shock: :shock:
You got ripped! I paid about $60.

for what model????
GQ
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Top
Posts: 24
Joined: Thu Jul 21, 2005 5:23 pm
Location: Brisbane

Post by grassyknoll »

Geeezz man, got one from Repco a week ago for $50 neat.

Are you sure you don't mean master cylinder???
Top
Posts: 114
Joined: Tue Jan 17, 2006 10:31 pm
Location: gosford

Post by outback_lux »

grassyknoll wrote:Geeezz man, got one from Repco a week ago for $50 neat.

Are you sure you don't mean master cylinder???
thats the one, new master cylinder
[quote="bogged"]anyone else get a technochubby reading this?[/quote]
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 2 guests