Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Surf/4runner idler arm bending problem.

Tech talk for Hilux

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 407
Joined: Wed Aug 20, 2003 10:02 am
Location: Hornsby Sydney

Surf/4runner idler arm bending problem.

Post by Surfin Alec »

Anyone else managed to bend an idlerarm on a IFS Surf/Hilux. I have managed to bend 2 in the last 6 weeks. The shafts have bent in the box that bolts on the chassis between the 2 bushes.
I am thinking of maybe sleeving the shaft with a brass bush and greasy nipples so there is no slop and therefore no more bending...maybe.
Anyone got any ideas???
GO the 80...The mods have started :-)
Top
Posts: 139
Joined: Fri Feb 21, 2003 12:22 pm
Location: Sydney

Contact:
Contact tritonasuras

Post by tritonasuras »

This is a very common problem with all the IFS 4runners/Surfs. N probably the IFS hiluxes too.

I believe Downey in the states has a idler arm gusset available but probably only for a left hand drive... U may be able to make one, or get one made if u check out theres...

Rob
Top
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

solid axle converion with crossover steering - problem solved :)

otherwise yeah I'd look at custom fabbing something bulletproof if the factory idler is weak.
Top
Posts: 3924
Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW

Contact:
Contact hypo

Post by hypo »

dumbdunce wrote:solid axle converion with crossover steering - problem solved :)

otherwise yeah I'd look at custom fabbing something bulletproof if the factory idler is weak.


was thinkin the same
:finger: HYPOFAB :finger:

Thanks to:

Polyperformance
Yuri 4x4
Longfield
Top
Posts: 407
Joined: Wed Aug 20, 2003 10:02 am
Location: Hornsby Sydney

Post by Surfin Alec »

Dont know of any good engineering type shops in the Hornsby Sydney area do ya? ;)
GO the 80...The mods have started :-)
Top
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

send a private message to 'Overkill' - he just might know of one :)
Top
Posts: 422
Joined: Mon Jan 06, 2003 5:57 pm
Location: On an Octopus

Post by pegasus »

I have done 2 as well..........

The best fix (in staying with the IFS) is to bolt on a steering bos from a left hand drive car. you will need to get this imported most likely!! :?

Stew
Top
Posts: 282
Joined: Sun Oct 27, 2002 9:15 pm

Post by BeZeRK »

maybe yas are hitting shit to hard!?

if the bushes wear out and there is movment then ya start having problems, replace the bushes as soon as there is any movment. they cost about $5 and take 10 mins to replace!
Top
Posts: 3924
Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW

Contact:
Contact hypo

Post by hypo »

BeZeRK wrote:maybe yas are hitting shit to hard!?


u pussy chadd :finger: ya gotta hit it hard it looks better that way
:finger: HYPOFAB :finger:

Thanks to:

Polyperformance
Yuri 4x4
Longfield
Top
Post Reply

Return to “Hilux”

Who is online

Users browsing this forum: No registered users and 0 guests