Hey All,
Also this weekend one of the double mounts holding the rear sway bar to the axle fell off. Actually the top bolt of one of the mounts has snapped or worked loose.
I need to replace the little metal mount, rubber bush, problay on both sides as the thing has rattled around all weekend. Plus the vertical rod on the loose side is slighty bent (reckon a vice can fix that).
SO to get these parts am I better off going to nissan, wreckers, or does someone have them lying ina shed I can buy off ya ?
Thanks
Steve
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Nissan GU Rear Sway Bar
Nissan GU Rear Sway Bar
2010 TB48 GU Patrol
1973 G60 MWB Soft Top Showcar
1972 G60 MWB Soft Top Project 4WD
1978 G60 Ute "HellPatrol"
www.oz4wdclassicparts.com.au
1973 G60 MWB Soft Top Showcar
1972 G60 MWB Soft Top Project 4WD
1978 G60 Ute "HellPatrol"
www.oz4wdclassicparts.com.au
It's used 80% onroad for towing and commuting. Would rather leave it on. However driving home from Jenolan wasnt to bad with a full load and flopping around sway barspottydog wrote:arb make extended ones two to threeinch part no is klc13 other than that just pull the whole lot off. it,ll flex better
2010 TB48 GU Patrol
1973 G60 MWB Soft Top Showcar
1972 G60 MWB Soft Top Project 4WD
1978 G60 Ute "HellPatrol"
www.oz4wdclassicparts.com.au
1973 G60 MWB Soft Top Showcar
1972 G60 MWB Soft Top Project 4WD
1978 G60 Ute "HellPatrol"
www.oz4wdclassicparts.com.au
Who is online
Users browsing this forum: No registered users and 0 guests