Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

pushing out control arm bushes?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 181
Joined: Thu Apr 14, 2005 12:09 pm
Location: Geelong VIC

pushing out control arm bushes?

Post by Glennb »

Hi all, I have just found that my rear control arm bushes have shit them selves. Is it possible to push them out using a g clamp? If so how can it be done? Or is their a relatively cheap tool I could buy.
Cheers
Glenn
Top
Posts: 2526
Joined: Wed Sep 01, 2004 8:21 am
Location: Outcast Offroad

Post by Micka »

You would be doing well to push it out with a G clamp. Just take the arm over to a mechanic and have them press it out and press the new one in while you are there. ;)
Top
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

What Micka said - Most bushes like that need 10-15 tonnes to push them out!!!
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Posts: 1918
Joined: Mon Sep 26, 2005 6:03 pm
Location: Victoria

Post by Jimbo »

I pushed my new ones in with a vice.
GQII Patrol YAY!!
Top
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

Jimbo wrote:I pushed my new ones in with a vice.
I have also pressed bushes in and out with a vice, but it was a BIG vice - the bar/slide was about 18" long and 4" wide.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Posts: 2590
Joined: Tue Jan 04, 2005 11:33 am
Location: Brisbane

Post by Chucky »

I cut the old ones out in my cruiser, VERY carefully,

I wasnt putting rubber ones back in so I didn't need a press to replace them.
My Cruiser is Environmentally Friendly.

It runs on recycled Dinosaurs.
Top
Posts: 2601
Joined: Tue Jul 13, 2004 8:02 pm
Location: warner, brisbane

Post by chunderlicious »

pajeros have radius arms at the rear. they CAN be done with a decent vice, but its alot easier and only costs like 40 bucks to have pedders take em out and put new ones in.
turbos are nice but i'd rather be blown
Top
Posts: 181
Joined: Thu Apr 14, 2005 12:09 pm
Location: Geelong VIC

Post by Glennb »

Thanks guys, didnt realize they need so much pressure to get them out. Think I might take the arms off and take them to a mechanic.
Cheers
Glenn
Top
Posts: 4990
Joined: Sun Oct 20, 2002 7:22 pm
Location: Qld, Hilux Country

Contact:
Contact bubs

Post by bubs »

On the same topic I had to push some GU ones out recently, the 20 tonne wouldn't do it, had to take it in to work and use the 200 tonne, getting them back in was much easier though, put the new bushes in the freezer for a few hours to help shrink them a fly shit will make installation easier if you have got all the fancy tools.
http://www.budscustoms.com.au
Like us and follow on facebook for up to date information of what we are working on and great random specials!

Custom Parts & Fabrication!
Ph: 0417 708 598
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests