Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Removing Diff oil-seal

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 77
Joined: Sat Jun 24, 2006 1:03 pm
Location: Adelaide

Removing Diff oil-seal

Post by Andres »

Hey all, I'm having some trouble removing the diff/axle oil seal. And tricks/tips?

So far i'm jsut using the head of a bolt and trying to pull it out with that - but with no luck!

Cheers
1999 Mitsubishi Pajero | 1986 Toyota Landcruiser 12HT - Gone but not forgotten!
Top
Posts: 571
Joined: Fri Apr 21, 2006 7:15 pm
Location: ormeau

Post by bastard »

A slide hammer with a 90 degree bend on the end,the same type used on spigot bearig etc.
Top
Posts: 70
Joined: Sun Oct 22, 2006 8:09 pm

Post by eggman »

hammer and screwdriver.. hammer the top in and the bottom will come out.. thats all i did for my 86 4runner
Top
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Contact:
Contact N*A*M

Post by N*A*M »

we have found multigrips can work as well. you just need to use the side that is the most hooked. ignore the other side. put the end under the lip then pry and jimmy it. it'll come out.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 85 guests