Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Rock hoppers too slow for beach work ?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 10
Joined: Mon Jan 03, 2005 8:22 pm

Rock hoppers too slow for beach work ?

Post by sspatrol »

Hi peoples getting rock hoppers for gu 3.0l manual running 33s but have concerns that low range will become to slow for beach work and not in market yet for 35s , any thoughts appreciated. cheers
to seek out and close with the enemy
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: Rock hoppers too slow for beach work ?

Post by bogged »

bloke who came to Robe wth me has a GU 3.0 with 35 Procomp MT's on and yes, struggled with pace in some of the areas.

But the only person who can tell is you, so find someone to take you for a drive and see what you think
Posts: 1153
Joined: Sat Apr 24, 2004 10:17 am
Location: Gold coast QLD

Post by Madmac »

i havent tried mine on the beach since i fitted my reduction gears, but i reckon low range will be near un useable on soft sand now. doesnt really worry me though, i dont like sand driving anyway
Posts: 618
Joined: Sun Mar 05, 2006 2:19 pm
Location: wakka wakka land

Re: Rock hoppers too slow for beach work ?

Post by weeman »

sspatrol wrote:Hi peoples getting rock hoppers for gu 3.0l manual running 33s but have concerns that low range will become to slow for beach work and not in market yet for 35s , any thoughts appreciated. cheers

what reduction gears are u going for?

the 80% 40% or 20%

I reckon the 80% are to low for just about everything, why not try the 40% gears as your only running 33's and it will be over geared with 80% gears..
For all your HID and LED stuff
http://offroadindustries.com.au/

Check us out on Facebook for weekly specials
www.facebook.com/pages/Offroad-Industries/137501182955527
Posts: 166
Joined: Wed Aug 09, 2006 2:50 pm
Location: melbourne

dld

Post by patzuki »

Yeah, a mate of mine has 33 and the rockhoppers and double difflocked, he had to do most of the beaches in high range as he was getting bogged. I have a standard gu with 33's and I was pulling him out!
you know you want one
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: Rock hoppers too slow for beach work ?

Post by bogged »

IMHO they are only good for what their name suggests..
Posts: 1918
Joined: Mon Sep 26, 2005 6:03 pm
Location: Victoria

Post by Jimbo »

"IMHO they are only good for what their name suggests.."

I agree here, i did a 2 week trip in tassie in a 3litre GU with 35's. It did most things very well but some steeper uphill rocky sections would have benifited with the gears. Also engine braking wasn't the best. However i think you would be fine with 33's.

Also do the gears help with the 3litres surging in 1st low trying to crawl up steep hills. I found it a pain in the butt!
GQII Patrol YAY!!
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Jimbo wrote:Also do the gears help with the 3litres surging in 1st low trying to crawl up steep hills. I found it a pain in the butt!
Hunk of sponge rubber fixes this.. cheap and easy and removeable when you wanna drive home
Posts: 1918
Joined: Mon Sep 26, 2005 6:03 pm
Location: Victoria

Post by Jimbo »

You sure?

We tried putting something under there rest your foot on and it made no difference. Throttle input was very light (just trying to crawl up) and we did not bounce up and down on it however the motor still surged up and down!! Is it becasue of drive by wire?
GQII Patrol YAY!!
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Jimbo wrote:Is it becasue of drive by wire?
pretty much... its been discussed on the 2332423423 patrol forums, and yea that was a fix...
Posts: 542
Joined: Wed Apr 28, 2004 10:28 am
Location: pomona,sunshine coast

Post by GRINCH »

go twin cases then you have the best of both worlds
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

GRINCH wrote:go twin cases then you have the best of both worlds
I agree this would rock.. costs and short shaft angles are the issues that are a worry..
Posts: 853
Joined: Fri Feb 10, 2006 6:38 pm
Location: Newcastle

Re: Rock hoppers too slow for beach work ?

Post by Mick. »

sspatrol wrote:Hi peoples getting rock hoppers for gu 3.0l manual running 33s but have concerns that low range will become to slow for beach work and not in market yet for 35s , any thoughts appreciated. cheers
If your running 83% then yes low range is usless on sand. I have 83% in mine and even with 37s the low range is way to low.

I would recomend you go the 43% reduction but even then it could be still to low. :?

Cheers Mick.
Posts: 542
Joined: Wed Apr 28, 2004 10:28 am
Location: pomona,sunshine coast

Post by GRINCH »

bogged wrote:
GRINCH wrote:go twin cases then you have the best of both worlds
I agree this would rock.. costs and short shaft angles are the issues that are a worry..
im in the process of doing them at the moment, cost so far has been $1050 for the adaptor
$250 to lenghten and shorten drive shafts incl balance
$0 for the transfer i had a spare lying around, but you can pick them up for less then $300

all i have left to do is modify the crossmember to clear the front drive shaft and work out a shifter arangment.
all up it hasnt cost much more then crawler gears. fingers crossed no issues will come up.
Posts: 4426
Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast

Post by bru21 »

GRINCH wrote:go twin cases then you have the best of both worlds
I have done this, cost about 3k to do it right with a two piece front shaft. running 37's and 4.625's its only just low enough for big rocks etc (87:1 overall i think). it is the best of both worlds, apart from ground clearance which is a bit lower. Not worth the $ on other than a comp truck

cheers bru
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Posts: 396
Joined: Wed Dec 17, 2003 3:34 pm
Location: South Side Brisbane

Post by Draven »

Ive got the 80% reduction gear from marks, and 1st is useless for sand., but saying that, i just use a taller cog...so 2nd instead of 1st etc, and it goes fine.
I do Web Hosting!
Http://www.ingenuity.net.au

Check out my 4x4 blog!
http://www.monster4x4.com.au/
Posts: 37
Joined: Sat Jul 08, 2006 10:47 am

Post by Bundy Chick »

(If your running 83% then yes low range is usless on sand. I have 83% in mine and even with 37s the low range is way to low.

I would recomend you go the 43% reduction but even then it could be still to low. Confused}


If the 43% is too low, go for the 24%. That's the way to go! ;) [/quote][/i]
Posts: 902
Joined: Wed Jul 21, 2004 5:29 pm
Location: Sydney

Post by stool »

Yes 83% Rockhoopers are to slow for sand .

But are excellent on rocks to over come small engine syndrome.
GQ with big nuts
Posts: 1698
Joined: Sun Nov 28, 2004 7:26 pm
Location: Canberra Australia

Post by Ezookiel »

bogged wrote:
Jimbo wrote:Also do the gears help with the 3litres surging in 1st low trying to crawl up steep hills. I found it a pain in the butt!
Hunk of sponge rubber fixes this.. cheap and easy and removeable when you wanna drive home
LOL, I thought you were being facetious and suggesting sponge rubber under the butt would fix the pain.
[url=http://www.4x4him.org]Bringing the Christian Rock Crawling Community a little closer[/url]
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Bundy Chick wrote:(If your running 83% then yes low range is usless on sand. I have 83% in mine and even with 37s the low range is way to low.

I would recomend you go the 43% reduction but even then it could be still to low. Confused}


If the 43% is too low, go for the 24%. That's the way to go! ;)
[/i][/quote]expensive exercise to find out which is right though at $1000+ each.
Posts: 4275
Joined: Fri Nov 22, 2002 6:41 pm
Location: Western Australia

Post by Hoonz »

i had marks reductions gears in my ute and ya just put it in 5th low its plenty to keep you on top with plenty of revs if not go high 4 1st
H( * )( * )NZ loves B( * )( * )BIES
if a fat lady falls in the forest do the trees laugh?
[quote="RUFF"]although i didnt mean to, i squealed like a girl :armsup:[/quote]
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests