Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
lexus v8 and auto
Moderators: toaddog, TWISTY, V8Patrol, Moderators
lexus v8 and auto
ayone got an opinion on the auto to put behind a lexus v8
either th350, th400, th700
thinking maybe the th700 'cause of the overdrive for getting to 4wd areas but not sure how it will hold the power??
don;t know much about auto's
luke
p's' going into hilux driving 35"
either th350, th400, th700
thinking maybe the th700 'cause of the overdrive for getting to 4wd areas but not sure how it will hold the power??
don;t know much about auto's
luke
p's' going into hilux driving 35"
I went the Surf box first, and changed to the UZ auto mid conversion.
The primary reason:
The Surf auto is controlled differently to the 1UZ auto and therefore my sparky was going to have to run my old Surf ECU for the Auto, a UZ ecu to control the engine and frankenstein the 2 to eachother. With no guarantee that it would run well - in fact he was pretty sure it wouldn't. Using a UZ auto allows you to keep a single ECU.
This issue is of course reduced in priority if you are using an aftermarket ECU and a tiptronic device.
Also, they don't bolt straight up. I sold my surf trans and bought the same model surf trans from a guy who had already modded it. I have the list somewhere here but among the tasks he had to do was moving the oil pump, swapping bellhousings, changing the input shaft, and others.
As stated, I then had issues with the ECU and swapped the TCase and bits to a UZ ECU and feel much better, should be on the road soon.
The primary reason:
The Surf auto is controlled differently to the 1UZ auto and therefore my sparky was going to have to run my old Surf ECU for the Auto, a UZ ecu to control the engine and frankenstein the 2 to eachother. With no guarantee that it would run well - in fact he was pretty sure it wouldn't. Using a UZ auto allows you to keep a single ECU.
This issue is of course reduced in priority if you are using an aftermarket ECU and a tiptronic device.
Also, they don't bolt straight up. I sold my surf trans and bought the same model surf trans from a guy who had already modded it. I have the list somewhere here but among the tasks he had to do was moving the oil pump, swapping bellhousings, changing the input shaft, and others.
As stated, I then had issues with the ECU and swapped the TCase and bits to a UZ ECU and feel much better, should be on the road soon.
red boy
ive seen it done.
all you gotta do is use a 1uz bellhousing. not one other mod is needed if your sparky knows his shit
but yes a 1uz box with surf rear half works too. surf box has better ratios tho
ive seen it done.
all you gotta do is use a 1uz bellhousing. not one other mod is needed if your sparky knows his shit
but yes a 1uz box with surf rear half works too. surf box has better ratios tho
1hd-fte 5 speed tiptronic 105 series
78 series troopy for work
gu ute play truck For sale
FTE 80 series sahara Sold
i think i have a problem
78 series troopy for work
gu ute play truck For sale
FTE 80 series sahara Sold
i think i have a problem
Scott (my sparky) runs Venom Cobras and has been wiring 1UZ engines for ... years, I am thinking 10 or more. Since Twisty's he had done several hilux conversions.
But from the guy who modded the Surf auto I bought:
“The auto does need more than the bellhousing, the front end (inpur shaft/plenatary/oil pump etc etc and different lenghths/splins, so you have to have someone who knows what they are doing pull down 1surf box and 1 lexus box and frankenstein both together.â€
But from the guy who modded the Surf auto I bought:
“The auto does need more than the bellhousing, the front end (inpur shaft/plenatary/oil pump etc etc and different lenghths/splins, so you have to have someone who knows what they are doing pull down 1surf box and 1 lexus box and frankenstein both together.â€
iwanahuma wrote:or you could mate up a hilux gear driven transfer to the auto, it has been done numerous times by people here, buds 4x4, haultech, and others!
and all of the ones you have meantioned make the drive line heeps longer. The one haultech did for bj got removed later on as he went for a different auto as he got sick of replacing it all the time.
True the length becomes an issue, the only way to make it shorter is to change the output shaft to the surf female output shaft. This in turn means you have to buy 23 spline gears for your t-case along with an adaptor all at once.Guts wrote:iwanahuma wrote:or you could mate up a hilux gear driven transfer to the auto, it has been done numerous times by people here, buds 4x4, haultech, and others!
and all of the ones you have meantioned make the drive line heeps longer. The one haultech did for bj got removed later on as he went for a different auto as he got sick of replacing it all the time.
http://www.budscustoms.com.au
Like us and follow on facebook for up to date information of what we are working on and great random specials!
Custom Parts & Fabrication!
Ph: 0417 708 598
Like us and follow on facebook for up to date information of what we are working on and great random specials!
Custom Parts & Fabrication!
Ph: 0417 708 598
Who is online
Users browsing this forum: No registered users and 53 guests