Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

claws - any good in aussie conditions?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Posts: 571
Joined: Tue Nov 19, 2002 3:56 pm
Location: New York

claws - any good in aussie conditions?

Post by zzzz »

Just wondering as I seem to be finding it hard to find some decent secondhand 36x12.5's TSL's.

Can get some 35" claws for cheap though but really haven't paid much attention to them recently.

cheers

z
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Post by Wendle »

I have run 35" claws for nearly 12 months. They are awesome now, but took about 3 or 4 months to loosen up and start working well. They even wear reasonably well on bitumen. I run them at 25psi on tar and 10psi for the fun stuff under ~2000kg of truck.
Posts: 571
Joined: Tue Nov 19, 2002 3:56 pm
Location: New York

Post by zzzz »

Cool. Do you drive them on road much?

I can get new 35" MTR's or used 35" claws for the same money....have to deal with a lot of mud and ruts in vic but wish there were a lot more rocks to play on.
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Post by Wendle »

ABout 200km on the road each week, for what they are they are not too bad on the road. The claws should be better in the mud than the MT/R's, but I don't really know, I avoid the mud here, it is goopy horrible shit..
The MT/R's I think grip rock better, but tear much easier. The claws are absolutely indestructible..
Posts: 1544
Joined: Tue Oct 22, 2002 8:37 am
Location: Performing booty fab in my Garage

Post by Wooders »

Definately the claws would be better suited to that mexican mud than MT/R's......
Last edited by Wooders on Fri Dec 15, 2006 11:45 am, edited 1 time in total.
Cheers [url=http://www.wooders.com.au]Wooders[/url]
Posts: 3924
Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW

..

Post by hypo »

Yeah but dont the radials have stiffer sidewalls ?? and carlton r yours radial or bias ??
:finger: HYPOFAB :finger:

Thanks to:

Polyperformance
Yuri 4x4
Longfield
Posts: 1544
Joined: Tue Oct 22, 2002 8:37 am
Location: Performing booty fab in my Garage

Post by Wooders »

.......Just go the TSL's................
Last edited by Wooders on Fri Dec 15, 2006 11:49 am, edited 1 time in total.
Cheers [url=http://www.wooders.com.au]Wooders[/url]
Posts: 160
Joined: Fri Nov 08, 2002 7:55 am
Location: melbourne

.

Post by madrangie »

how do the pro comp X compare to both claws and tsl ?
Posts: 374
Joined: Mon Oct 28, 2002 8:09 pm
Location: BRISBANE

Re: .

Post by v8grunt »

madrangie wrote:how do the pro comp X compare to both claws and tsl ?


I RUN BAJA CLAWS (BIAS PLY) FOR 2 YEARS AND FOUND THEM THE TOUGHST TYRES I HAVE EVER USED BUT AT A PRICE, THEY WERE A NIGHTMARE ON ROAD. FORGET ABOUT DRIVING ON WET ROADS YOU WILL BE DOING 360S OTHER WISE GREAT OFFOAD, PLENTY OF BITE

PRO COMP XTERRIAN IS DESIGNED FOR ALL CONDITIONS AND IS A RADIAL TYRE AND IS VERY GOOD IN WET CONDITIONS AND ON ROAD
BEST ROCK TYRE I HAVE USED EVER. VERY QUIET ON ROAD AND HANDLE WELL. I HAVE RUN PRO COMP OR 12 MTHS. AND WON THE LOGAN EXTREME NIGHT RUN ON THEM
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Im running 38.5/16/15 radial claws but havent realy formed an opinion on them yet.I have only been out on them twice but so far im impressed.
Posts: 8
Joined: Sat Nov 02, 2002 2:25 pm
Location: Portland Or. Usa

Post by tomota »

I run 35 x12.5 radial claws and love them they are great on the highway and work excellent in the mud. When aired down they spread out really nice under the weight of my hilux.
Posts: 571
Joined: Tue Nov 19, 2002 3:56 pm
Location: New York

Post by zzzz »

Definitely not going with radial claws.

Just a hard choice to make to move from my Simex JT2's to something else.

Either have to hang around for a long time waiting for the TSL's to appear in the trading post or somewhere, or pick the claws up now.

very tough - will keep searching around for info.

Thanks for the replies
Posts: 165
Joined: Fri Nov 15, 2002 12:07 am
Location: kinglake /melb

Post by ALPINE-OFF-ROAD »

go for the claws even if you dont likem just sell the on
i have them on my nissan swb 37 13 50 and so far they are shit hot
HAYDEN
ALPINE OFF ROAD .......0411 306 254
GQ SHORTY NOW LWB UTE 4.88 TWIN LOCKED 37 BEADLOCKS CO2 AIR AND MORE
GU 4.8 PURE GRUNT LOL LOL
wwww.alpineoffroad.com coming soon
A1zook

Post by A1zook »

Hot as in they fell off the back of a truck shite wish that would happen 2 me !!!!!!!!!!! :twisted:
Posts: 165
Joined: Fri Nov 15, 2002 12:07 am
Location: kinglake /melb

Post by ALPINE-OFF-ROAD »

I WISH

NAHHHHHHHH I HAD TO PAY FOR THEM .........

WELL SORT OF IM PART OF TEAM CLAW
HAYDEN
ALPINE OFF ROAD .......0411 306 254
GQ SHORTY NOW LWB UTE 4.88 TWIN LOCKED 37 BEADLOCKS CO2 AIR AND MORE
GU 4.8 PURE GRUNT LOL LOL
wwww.alpineoffroad.com coming soon
User avatar
POS
Posts: 4318
Joined: Tue Oct 22, 2002 8:52 pm
Location: Perth

Post by POS »

TEAM CLAW are you going to compete at XRCC :?:
Posts: 248
Joined: Mon Oct 21, 2002 8:55 am

Post by spice »

hey hayden u drivin your ute now as your DD or u still using the commodore?? you should come down to mobil an talk to me caus i get bored lots of the time..
NAM IS THE SOFTPORN KING!!!

<mage> what should I give sister for unzipping?
<Kevyn> Um. Ten bucks?
<mage> no I mean like, WinZip?
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

ALPINE-OFF-ROAD wrote:I WISH

NAHHHHHHHH I HAD TO PAY FOR THEM .........

WELL SORT OF IM PART OF TEAM CLAW

Image
Posts: 434
Joined: Wed Jul 13, 2005 10:07 am
Location: Gold Coast

Post by waxhead.. »

I reckon radial claws are pretty ordinary, MTR's anyday in my opinion.
Image
92 WT Sierra
04 Navara STR Dual Cab 3.0di
Posts: 571
Joined: Tue Nov 19, 2002 3:56 pm
Location: New York

Post by zzzz »

Nice necro bogged :finger:

Anyways since this thread has been dug up...

How are people liking the claws now?
I have heard of a lot of people damaging them quiet easily.

I am leaning towards the Maxxis Creepy Crawlers as my next tyre of choice?
35" variety as 37's just look a bit silly on a road driven Jeep :D

Or 35" Krawlers but can't find them cheaper than $550 or so :(

Someone give us a run down on the tyres you are running at the moment and how you like them...
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

I run 33" claws. They absolutely love mud, rock and dirt.

Radials as well, they are pretty good on road, only really notice the difference when on highway sweepers, they like to understeer. And when slowing down or taking off they judder and sound like a Jumbo jet.

Mud is there favourite place, they are not unbeatable but they take a bit.

I run at 18psi on mud, rocks or dirt.

They don't really slip unless I literally have two diagonal wheels off the ground, diff locks would fix that.

That said there may be better tyres out there but I dont think claws will dissapoint in Victoria.

Cheers
Posts: 1047
Joined: Sun Nov 19, 2006 2:27 pm
Location: Wollongong

re: tyres

Post by Nelso »

I've run radial claws and MTR's and find the MTR a better tyre for grip in most situations. I think the bias ply claw is a different story though as most guys I know that have run bias ply's were happy with them.

I won't ever buy radial claws again as there are better tyres on the market.
What's the difference between ignorance and apathy? I don't know and I don't care.

I am an insomniac dyslexic agnostic. I often lay awake all night wondering if there really is a Dog.
Posts: 273
Joined: Fri Jul 30, 2004 6:39 pm
Location: cranbourne

Post by embryo »

waxhead.. wrote:I reckon radial claws are pretty ordinary, MTR's anyday in my opinion.
Image
i could show you a photo like that of every tyre on the market. IMO the only down side of the claws is due to the tread design they are no good on the off camber slipery stuff. aside from that good in mud and rocks, they are noisy on road as you would expect.
dont tell the missus
Posts: 352
Joined: Mon Dec 23, 2002 9:10 pm
Location: Sydney

Post by 65Mog »

I ran 37 13.5 bias claws on my Patrol, I didn't like them at all, they are way too stiff in the side wall, they don't bag up.
Posts: 4426
Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast

Post by bru21 »

I am on to my 3rd set of radials. I have had 35's and now run 36 x 15.5 r15. They are fantastic on road and look staunch! I haven't used them much for offroad work and probably won't apart from beach / social plays. I also run bias 37's as so far they are great!

Ring Ryano @ Forby's for the best information, (although 37 bias are no longer available new)

Cheers Justin
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Posts: 41
Joined: Sun Jun 22, 2003 12:28 pm
Location: Sydney

Post by mwhitfield_2000 »

I ran 37" Claws on my GU Patrol for a year and was throughtly impressed had MTR and BFG muddies hated them!!! punctured them all, (maybe its the way i drive :D )

But seriously they are tops and i bought a set for my GQ Patrol as well

Fairly priced and work excellent off road and have lots of sexyness about them :armsup: :armsup:

They do take time to wear in though and yes they dont bag as nicely as MTR or BFG

Good luck in your choice

Cheers Matty
Live for the moment and bugger the rest

IF YOU CAN"T BREAK IT, I WILL

www.buildersunited.com.au
Posts: 412
Joined: Fri Jul 14, 2006 6:03 pm
Location: brisbane

Post by rvh96 »

i run 315/75/16 radial claws on my GU coil cab and for a combo of road ,rock,dirt,sand i recon their pretty good i try to stay away from mud so cant comment there my son runs 35 inch creepy crawlers on his GQ great on rock ,dirt and mud but woefull on road
'05 GU Patrol coil cab ST
6" lift
Tough dogs
Snake Racing drop arms
3rds Rear Arms
Twin ARB air lockers
37" trepadors
ARB bullbar
WARN winch
High flow turbo
3" mandrel bent exhaust
Posts: 312
Joined: Sat Feb 08, 2003 12:49 pm
Location: Esperance WA, currently travelling around OZ

Post by GQ Toy »

Bias Claws on a patrol ute have done well, noisey on bitumen otherwise performed well for me in mud, sand and rock. only punctures were from broken glass :x . Run down to 8-10 psi with beadlocks and they flex well
Posts: 434
Joined: Wed Jul 13, 2005 10:07 am
Location: Gold Coast

Post by waxhead.. »

i could show you a photo like that of every tyre on the market. IMO the only down side of the claws is due to the tread design they are no good on the off camber slipery stuff. aside from that good in mud and rocks, they are noisy on road as you would expect.
Yeah that pic was not meant to be defamatory, I had just taken it the day before and thought i would throw it up thats all..
92 WT Sierra
04 Navara STR Dual Cab 3.0di
Posts: 762
Joined: Tue Oct 26, 2004 6:46 pm
Location: Diamond Creek

Post by mule75 »

i had 35 radial claws and they were shite. never again. they peeled off the rims to easy at low pressure. the sidewalls ripped open easy as well.
Post Reply

Who is online

Users browsing this forum: No registered users and 142 guests