Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

seating bead locks

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Contact:
Contact NICK

seating bead locks

Post by NICK »

was fitting my beadlocks today and i cant get them to seal.

the air is leaking out between the the locking metal rings, i torgued them up to 20 pound and to no avail.

Do i talk them alittle more, use silcon, whats the trick?


NICK
TECH SCREW GURU
Top
Posts: 374
Joined: Mon Oct 28, 2002 8:09 pm
Location: BRISBANE

Post by v8grunt »

NICK i use constuction grade SIKAFLEX on problem beadlocks, lift the bead from the rim face and run a bead of sikaflex where the bead sits and
bolt them up, sounds a bit exteme but it does work. failing this check that the weld is not leaking from stress.

glen
Top
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Contact:
Contact NICK

Post by NICK »

i was thinking sikaflex also, i did a visual on the welds and they seemed to be ok, i do know that it only takes the smallest whole and it is all over.

you can feel and hear the air coming out so it is a major problem.


is there any problem cracking the sikaflex when the rubber needs to be changed?


NICK
TECH SCREW GURU
Top
User avatar
POS
Posts: 4318
Joined: Tue Oct 22, 2002 8:52 pm
Location: Perth

Post by POS »

Nah i didn,t have a problem :lol:
Top
User avatar
POS
Posts: 4318
Joined: Tue Oct 22, 2002 8:52 pm
Location: Perth

Post by POS »

Nick i have heard that sikaflx will do the job, or you can buy some shait that stays like a liquid and as you drive it conforms to any holes ect, dont ask me what its called.
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Re: seating bead locks

Post by bj on roids »

NICK wrote:was fitting my beadlocks today and i cant get them to seal.

the air is leaking out between the the locking metal rings, i torgued them up to 20 pound and to no avail.

Do i talk them alittle more, use silcon, whats the trick?


NICK


nick, i think you should of had rod and todd do it for you :lol: hyrollic beadlocks
hands and mums dont count!!!
Top
Posts: 1544
Joined: Tue Oct 22, 2002 8:37 am
Location: Performing booty fab in my Garage

Contact:
Contact Wooders

Post by Wooders »

Yeah sikaflex was what I was told....
However when I did my beadlocks I just wet the tyre bead and it popped in and sealed sweet :D
Cheers [url=http://www.wooders.com.au]Wooders[/url]
Top
Posts: 2388
Joined: Sun Nov 24, 2002 10:20 pm
Location: bacabugari

Contact:
Contact big red

Post by big red »

nick, when i tried fitting bfg's to my JT beadlocks i found that the bead gap of the wheels was 12.5 mm and the bead thickness of the bfg's was 12.0mm and even silicon wouldn't fix that, no problems with centipedes, swampers etc.
[url=http://bigred.redbubble.com/][color=red][b]You can follow me but its gunna hurt ![/b][/color][/url]
event pics http://bigred.redbubble.com/
Top
User avatar
POS
Posts: 4318
Joined: Tue Oct 22, 2002 8:52 pm
Location: Perth

Post by POS »

Yeah thats what i was thinking, maybe its clamping up on the steel and not really compresing the rubber.

It may be worth while pulling them of, measure the bead and skim the face on either the ring or the rim.

Silicon would work ok if it was a slow leak, i know some guys put it on the inner bead to offer some form of resistance to rolling the inner bead off.
Top
Posts: 276
Joined: Mon Nov 11, 2002 5:36 am
Location: Melbourne

Tried Tubes?

Post by srowlandson »

I run Simex tubes in my Q78's on Beadlocked 16x8's, works a treat.


Steve
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 3 guests