Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

brake issues with a GU

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 199
Joined: Thu May 04, 2006 5:18 pm

brake issues with a GU

Post by vorno_18 »

i have a 99 2.8td GU and i cant get a brake pedal, ive replaced the master cylinder and bleed out all the brakes, with the car off the pedal feels good and doesnt sink or anything but once the car is started the pedal goes almost to the floor and sinks if you leave your foot on it. it seemed to me to be the master as it was sinking but got a brand newy and it still happens

any ideas
60 series cruiser, GU patrol
Top
Posts: 536
Joined: Mon Apr 18, 2005 2:59 pm
Location: sydney

Post by micka1 »

did you bleed the master cylinder after putting it on ? and check for any leaks in the system .
Top
Posts: 199
Joined: Thu May 04, 2006 5:18 pm

Post by vorno_18 »

yes i bench blead the master and there are no leaks in the system

i have gq brakes on the gu will this cause any dramas, from what i can see it shouldnt but there may be some differences to why its not working
60 series cruiser, GU patrol
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

vorno_18 wrote:yes i bench blead the master and there are no leaks in the system

i have gq brakes on the gu will this cause any dramas, from what i can see it shouldnt but there may be some differences to why its not working
why do you have GQ brakes on the GU?

What model brakes are they off, and what model is it going on? There are different calipers, thickness discs, diameter discs, etc.

Bleed each section of hose/line 1 at a time...
Top
Posts: 199
Joined: Thu May 04, 2006 5:18 pm

Post by vorno_18 »

the person i bough it off swapped the diffs with his gq comp truck

i have blead each line seperately, staring from lhr then rhr then lhf the rhf and no air is coming out only fluid thats why i cant work it out everything seems normal
60 series cruiser, GU patrol
Top
Posts: 536
Joined: Mon Apr 18, 2005 2:59 pm
Location: sydney

Post by micka1 »

is the system losing any brake fluid out of the rear of the master cylinder maybe ? also gu patrols have twin spot front calipers so you may have to adjust the brake proportioning when you get it going .
Top
Posts: 286
Joined: Tue May 11, 2004 8:48 pm
Location: Toowoomba

Post by patrol man »

Are the front wheel bearings tight?
Living the dream on the hill that floods
Top
Posts: 1152
Joined: Mon Sep 25, 2006 8:25 pm
Location: the most livable planet in the universe

Post by its aford not a nissan »

is the master cylinder for the gu or gq as there "might" be a dfference in the amount of fluid going through it

on my gq my brakes were spongey only when running and hard when off put new pads in and took out the metal shims between pads and the pistons and now they are nice and firm

just a thought
Top
Posts: 199
Joined: Thu May 04, 2006 5:18 pm

Post by vorno_18 »

the car is all gu except the diffs and calipers/rotors on the diffs

no fluid leaks at all
60 series cruiser, GU patrol
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 61 guests