Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

indicator problem

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 321
Joined: Sat Jul 30, 2005 10:14 pm
Location: Canning Vale, W.A

indicator problem

Post by Patchy »

Ok here is the problem. My indicators flash once when turning then turn off and stay off. My question is would I be looking for a dirty/stuffed comination switch? Or a stuffed flasher unit (I would have thought with a stuffed flasher unit they would just stay on)?
Im going to pull the combination switch apart tomoz night but if this sounds like a flasher unit to anyone, please yell out and let me know. Secondly where are the flasher units in patrols SWB MK, I assume they have one for the indicators and a seperate one for the hazards.
Top
Posts: 1152
Joined: Mon Sep 25, 2006 8:25 pm
Location: the most livable planet in the universe

Post by its aford not a nissan »

i would swap the flasher unit first or atleast borrow a mates just to eliminate it before pulling things apart

unless you enjoy pulling things apart and it is probly full of dust dirt and crap anyway
Top
Posts: 109
Joined: Sat Jul 08, 2006 11:31 am
Location: Rockingham, Western Australia

Post by gorilla »

spray crc into the combination switches, fixs most patrol problems related to combination switches.
GQ leafy ute - TD42, 2" lift, parabolics up-front, dove tail tray and 37" IROKs
Top
Posts: 321
Joined: Sat Jul 30, 2005 10:14 pm
Location: Canning Vale, W.A

Post by Patchy »

they look fairly simple so don't exppect it to take too long to pull apart if i did. where are the flasher units on them, do you know? and do they have a seperate one for hazard lights?
Top
Posts: 1152
Joined: Mon Sep 25, 2006 8:25 pm
Location: the most livable planet in the universe

Post by its aford not a nissan »

actually im not too sure where they are as i havnt had to play with mine yet but i did read somewhere around the brake pedal
you could always turn on your hazard lights (as i would asume they are next to eachother) and trace the clicking noise


edit; just looked in the bible and it is above the brake but i also noted no seperate hazard flasher just said if hazard lights dont work replace flasher and no other flasher is in the diagram
Top
Posts: 6411
Joined: Tue May 27, 2003 11:49 pm
Location: Brisbane Australia

Contact:
Contact Beastmavster

Post by Beastmavster »

Some flasher cans come on and then flash off and some come on in off mode and flash on.

From model to model you may notice differences like that.

It sounds like its flashercan.

Have you tried hazards? This would eliminate issues to do with the indicator switch itself.
Top
Posts: 853
Joined: Fri Feb 10, 2006 6:38 pm
Location: Newcastle

Contact:
Contact Mick.

Post by Mick. »

Patchy wrote:they look fairly simple so don't exppect it to take too long to pull apart if i did. where are the flasher units on them, do you know? and do they have a seperate one for hazard lights?
You cant miss them mate there basicly just above your brake and throttle and are held in with a 10mm bolt from memory.

I actually had mine fall out while I was driving and thats how I found it. :bad-words:

Cheers Mick.
Top
Posts: 321
Joined: Sat Jul 30, 2005 10:14 pm
Location: Canning Vale, W.A

Post by Patchy »

yeah my hazards work. i know that ford use a sepperate flasher can for the hazards, just why i ask. cheers for the help guys. will have it sused tonight and will let you know.
Top
Posts: 321
Joined: Sat Jul 30, 2005 10:14 pm
Location: Canning Vale, W.A

Post by Patchy »

ok fellas fix the problem (sort of) pulled the cover off the combination switch everything looked good there. went looking for the flasher can.... :shock: 2 flasher cans just as i thought, both 2 pin cans, both interchangable with each other swapped them around and now my indicators work and my hazards well..... I wont be needing them, its not a toyota :D
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 4 guests