Sorry for this, should have included it in my other post, how much of the guard do i cut off to fit 33's with only a 2" body lift.
Thanks for your patience
Dixie
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
How much to cut
Moderator: Micka
How much to cut
There is no such thing as a stupid question only stupid people
Thanks Andrew,
I finally did it and all i did was basically followed the contour of the flare cutting just above, it doesn't look to bad, now I have to some fit flares as I didn't leave any tabs. Now to put the MTRs under and check for clearance might have to get some new springs because I think she is sagging.
Dixie
I finally did it and all i did was basically followed the contour of the flare cutting just above, it doesn't look to bad, now I have to some fit flares as I didn't leave any tabs. Now to put the MTRs under and check for clearance might have to get some new springs because I think she is sagging.
Dixie
There is no such thing as a stupid question only stupid people
Who is online
Users browsing this forum: No registered users and 34 guests