Who makes drop hitchs for towing in Lifted trucks?

Post by **4Speed** » Wed Jan 03, 2007 2:04 pm

I need I guess a touge with a longer drop on it so my trailor is'nt pointing to the moon when I'm towing (6" lift). I know there around I've used others before, but who makes them?

any help cheers

In newcastle??

Post by **CWBYUP** » Wed Jan 03, 2007 2:08 pm

anyone who sells hayman reece towbars can get them.

we sell them here for $75 from memory but i'm in sydney.

Cheers Nick

Post by **4Speed** » Wed Jan 03, 2007 2:09 pm

thanks mate..

Post by **Goatse.AJ** » Wed Jan 03, 2007 2:22 pm

Have you done a spring-over on the trailer and put bigger tyres on it? That'll at least save a bit of grief with reduced departure angle from having a plough tounge hanging off the rear of you truck.

Post by **4Speed** » Wed Jan 03, 2007 2:26 pm

I would if I could, it was my first thought. (Any very easy)

The trailor takes to boats, it would be to hard to lift the second boat on at that height. The other thing is, this trailor will not ever see dirt.

Thanks for the Thought Cheers

Post by **chimpboy** » Wed Jan 03, 2007 2:48 pm

Can't answer the question, but look before you buy. I have seen some really stupid "drop hitches" that could not be trusted to hold any serious weight or even survive heavy braking.

Post by **STIKA** » Wed Jan 03, 2007 2:51 pm

i have been using one to tow a car trailer and it has bent over time

It maybe ok for light loads but i would not recomend it for high loads

Post by A1 » Wed Jan 03, 2007 2:59 pm

ISP @ Glendale sell the hayman reece gear as prob do lots of other spare part suppliers ....They have a few different types and one of them has a significant drop ....I had to source one before for my old rig

Dan

Post by **J Top** » Wed Jan 03, 2007 7:37 pm

For a big drop I use 2" solid, not RHS, to get the strength required, bring it out of the T/Bar 40mm and gusset down the back of the dropper for more weld area and support
J Top

Post by **QIKAZZ** » Wed Jan 03, 2007 9:11 pm

ive been looking for one of these 2, but i want a s/h one because im tight lol

I have found these ones, they are nice, but I rekon freight would cost an arm and 2 legs.

http://cgi.ebay.com/ebaymotors/Self-Loc ... 1849QQrdZ1

http://cgi.ebay.com/ebaymotors/ws/eBayI ... mot_widget

Post by **v840** » Thu Jan 04, 2007 1:09 pm

I cant remember cause its been a while but I think the range rover tongue has quite a drop on it. Im pretty sure thats what I was using to tow my boat with a sprung over 40 series with 35s etc.

Ask your local trailer manufacturer. If in Sydney, try that tow shop on the Great Western Highway at the top of Pendle Hill in Western Sydney.

Outer Limits 4x4 Board

Who makes drop hitchs for towing in Lifted trucks?

Who makes drop hitchs for towing in Lifted trucks?

Who is online