Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

SR20det

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 217
Joined: Thu Nov 30, 2006 12:33 pm
Location: Woodford

SR20det

Post by FullbackNo1 »

hey i was wondering if anyone has done a conversion with a SR20DET in a vitara
Top
Posts: 459
Joined: Sat Jul 29, 2006 8:39 pm
Location: brisbane (boganhole)

Post by short stuff »

yes there is one done down here some where ive seen it once
Top
Posts: 217
Joined: Thu Nov 30, 2006 12:33 pm
Location: Woodford

Post by FullbackNo1 »

have you talked to the guy i am wondering what gearbox would be used and wat mod you would do to get it in
Top
User avatar
A1
Posts: 3451
Joined: Tue Jan 28, 2003 8:57 pm
Location: NEWCASTLE

Post by A1 »

http://carl.outerlimits4x4.com/viewtopi ... 20det+zook





Id say its missing some pics by now ......although I think christover1 may chime in with some info



Dan
[b][i] DAN [/i] [/b]


:silly:
Top
User avatar
A1
Posts: 3451
Joined: Tue Jan 28, 2003 8:57 pm
Location: NEWCASTLE

Post by A1 »

Santos wrote:
hmmm.. what i want to know is how is the auto RWD box made 4wd?
i skimmed through the thread and you know i can't find any details..


Custom made Jack shaft from output of auto to the standard Sierra/Sammy transfer case, though its in a custom position.. It is a LWB so plenty of room.

I have a million pix of the build, can't put em all up, but if asked for specific issues, I can put up some of them.

christover


A quote from the thread ....I say he ran the SR AUTO RWD box ;)


Dan
[b][i] DAN [/i] [/b]


:silly:
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

A1 wrote:Santos wrote:
hmmm.. what i want to know is how is the auto RWD box made 4wd?
i skimmed through the thread and you know i can't find any details..


Custom made Jack shaft from output of auto to the standard Sierra/Sammy transfer case, though its in a custom position.. It is a LWB so plenty of room.

I have a million pix of the build, can't put em all up, but if asked for specific issues, I can put up some of them.

christover




A quote from the thread ....I say he ran the SR AUTO RWD box ;)


Dan
From memory its a hybred (or that may have been the manual box he ran earlier .. not sure)
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
User avatar
A1
Posts: 3451
Joined: Tue Jan 28, 2003 8:57 pm
Location: NEWCASTLE

Post by A1 »

Yeah ....im only going off what I read above.....im sure people will chime in ....
[b][i] DAN [/i] [/b]


:silly:
Top
Posts: 1183
Joined: Thu Jul 01, 2004 5:05 pm
Location: Tewantin

Post by flyinwall »

that build up thread is for a sierra and from the first post on this thread he was talking about putting it in a vitara
R.I.P. Darryl "DAZZA" Mutch 02/08/1978 - 26/08/2012 aged 34 years ... You will be missed my little brother.

http://www.outerlimits4x4.com/viewtopic.php?f=16&t=39190&start=150
Top
User avatar
A1
Posts: 3451
Joined: Tue Jan 28, 2003 8:57 pm
Location: NEWCASTLE

Post by A1 »

:oops: but he also asked what Gearbox to use and that was what I was replying to ........so the thread should still be able to help ...... :idea: .....

Either way Id say he's going to have to use a RWD SR box .....unless adaptors are his fortay (sp)



Dan
[b][i] DAN [/i] [/b]


:silly:
Top
Posts: 580
Joined: Tue Jan 20, 2004 7:49 pm
Location: port stephens

Contact:
Contact toysuzi

Post by toysuzi »

love_mud wrote:
A1 wrote:Santos wrote:
hmmm.. what i want to know is how is the auto RWD box made 4wd?
i skimmed through the thread and you know i can't find any details..


Custom made Jack shaft from output of auto to the standard Sierra/Sammy transfer case, though its in a custom position.. It is a LWB so plenty of room.

I have a million pix of the build, can't put em all up, but if asked for specific issues, I can put up some of them.

christover




A quote from the thread ....I say he ran the SR AUTO RWD box ;)


Dan
From memory its a hybred (or that may have been the manual box he ran earlier .. not sure)
the original gearbox was an sr20 front section with an early 240-260z or skyline extention housing witch also needed machining to accpet the larger silvia bearings.
it may still be for sale. you could find out through christover if its avalible.

hope that helps a little

cheers daryl
Top
eXc
Posts: 230
Joined: Tue Dec 12, 2006 9:01 am
Location: Newcastle, NSW

Post by eXc »

Not sure how it would go in the zook, but the SR20 gearbox's are known to be weak (I am talking circuit racing here) People upgrade them to a RB25 (R33 Skyline) Gearbox.

Could be worth considering for the conversion...not sure how hard 4x4 is on the gearbox?

Price wise, you are looking at around $400 for a SR20 box, and $1000+ for a RB25 box....

If you are chasing SRs and RBs look at

http://www.nissansilvia.com
and
http://www.skylinesaustralia.com
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 2 guests