Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Cut'n her up

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 57
Joined: Thu Apr 27, 2006 7:56 pm
Location: Mackay, QLD

Cut'n her up

Post by C.A.Moseley »

I'm half way threw a cut down on my rangie. I'm going for an open pick-up. Need help with a few engineering questions, can i mount rear seat belts on the rear diagonals, can i rivet the roof to the main hoop? Thanks
'78 2 door Rangie, 3.9L , 2" body, 4" long travel, 35s, rear locker, disco auto, caged. GQ 4.2 18psi, 5" lift, ARB lockers, 33s,
Top
Posts: 3385
Joined: Fri Sep 17, 2004 8:26 pm
Location: Melbourne

Post by shakes »

seat belts are a definate ask an engineer!!! I was allowed to rivet my roof down as long as they were proper structural rivets, not your run of the mill sheetmetal rivets.
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

Not sure what you mean about the roof, when i shortened mine i just used a strip of excess ally and put it under the join then riveted both sides into one of the steel ribs. It is still held on with the original self tappers.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 2 guests