Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

is this a pajero control arm?

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 12
Joined: Wed Jul 30, 2003 12:12 pm
Contact:
Contact yelzook

is this a pajero control arm?

Post by yelzook »

heyas, just wondering if anyone here could indentify this control arm. I've been told it may be from a Pajero.

any info would be great. Year etc. If it is from a Pajero, are they easy to get from wreckers, and if so, how much ya reckon they'd cost?

Also, are the front control arms and rear the same? does anyone have any info or specs for the rears if they are diferent. The measurments i'm going on here, means i need the roughly the same length for the rears.

here's a pic of what i have.

Image

any info would be great, thanks!
Top
Posts: 12
Joined: Wed Jul 30, 2003 12:12 pm
Contact:
Contact yelzook

Post by yelzook »

hrm, i was just looking around, sorry i don't know anything about pajeros... so it looks like they are IFS?

this pic looks like it could be a match.

Image
Top
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

Yes, Pajeros are IFS. The control arm certainly looks like a match. The second photo is a short wheelbase - I don't know if LWB & SWB use the same arms, but I'd be surprised if they didn't.

Cheers,

Scott
Top
Posts: 12
Joined: Wed Jul 30, 2003 12:12 pm
Contact:
Contact yelzook

Post by yelzook »

thanks scott, yeah i reckon the lwb and swb would be the same.

can someone confirm the measurements?

The distance between the first bolt and the first washer on the control arm is pretty close to 70cm.
here's what i mean...
Image

any ideas of how much these things would cost as a wreckers?
Top
Posts: 267
Joined: Sat May 07, 2005 6:56 pm
Location: sydney, NSW

Post by Miyagi »

nope, but i've got a set in the garage collecting dust....
He who laughs last thinks slowest.
Top
Posts: 1084
Joined: Sun Apr 04, 2004 9:33 pm
Location: Aotearoa

Post by J Top »

Dont forget they break under forced articulation, I have seen posted that maybe only the Gen 1s break but not sure
J Top
Top
Posts: 12
Joined: Wed Jul 30, 2003 12:12 pm
Contact:
Contact yelzook

Post by yelzook »

thanks for all the info. I went to a wreckers and am getting some tomorrow. Hopefully they will fit.
Top
Posts: 1107
Joined: Wed Jul 20, 2005 6:44 pm
Location: Melbourne

Post by hudson44 »

yelzook wrote:thanks for all the info. I went to a wreckers and am getting some tomorrow. Hopefully they will fit.
Can i ask what vehicle they will be going on?
Top
Posts: 12
Joined: Wed Jul 30, 2003 12:12 pm
Contact:
Contact yelzook

Post by yelzook »

aya hudson44, yeah , it's a swb sierra
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 14 guests