Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

biggest leaf spring bush

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 510
Joined: Tue Jul 22, 2003 9:42 pm
Location: melbourne

biggest leaf spring bush

Post by modman »

you guys may be able to help here?
i am going to have some custom main leaves made and want the largest eye bush available- 50-60mmwould be nice
i don't want orbit eyes yet, because of the expense.
someone told me xp rear bushs are large, but they are not long enough(50mm diameter x 38mm long)
any ideas you leaf freaks :? :?
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

Modman,

I'm assuming that by orbital eyes you are meaning something like this:

http://www.bigballsoffroad.com/prod484.htm

They are $75 each, which you're right - isn't as cheap as chips, but perhaps spending $20 bucks or so on finding larger bushes is not worthwhile when that would put you 25% of the way to owning what you want to end up with anyways?

I presume you are getting springs custom made to fit the orbital bushes - why not use your existing springs for a little bit longer and save that dough sooner?

Just a thought.
DMA Founding Member #1 - Now Retired
Posts: 510
Joined: Tue Jul 22, 2003 9:42 pm
Location: melbourne

Post by modman »

greg, custom leaves for the orbital eyes are more expensive than the customs i want made.
i'm doing welding and metal fabrication at tafe and intend eventually to make my own 5 link front and a frame rear.
therefore i don't want to go down the road with 4 orbital eyes, custom leaves, maybe even drop shackles.
i can get custom length 50mm eye main leaves for $100 each
Posts: 947
Joined: Fri May 16, 2003 10:10 pm
Location: hervey bay

bush

Post by humphey »

hi modman . the bigest one in rubber i have found is a early falcon front eye bush that is 51 mm and is 70mm wide . eg xw xy xa xb xc falcons . depens on how u use them is to how they work theh do flex well.hope this helps :D
Posts: 139
Joined: Fri Feb 21, 2003 12:22 pm
Location: Sydney

Post by tritonasuras »

check out 60 series bushes...
Posts: 947
Joined: Fri May 16, 2003 10:10 pm
Location: hervey bay

b

Post by humphey »

60 series are 35mm od :D
Posts: 510
Joined: Tue Jul 22, 2003 9:42 pm
Location: melbourne

Post by modman »

allready looked at all the 4wd's largest was some model landcruiser at 40mm, not sure what model.
when i get them i may drill them like strangerover did
Posts: 1837
Joined: Sat Nov 09, 2002 10:49 am
Location: Brisbane

Post by beebee »

modman wrote:allready looked at all the 4wd's largest was some model landcruiser at 40mm, not sure what model.
when i get them i may drill them like strangerover did


Is there a link to this? (the drilling part)
TEAM DGR WEBSITE
TEAM DGR ON FACEBOOK

Sponsors:
SUPERIOR ENGINEERING
LOCKTUP 4X4
UNIVERSAL DRIVESHAFTS QUEENSLAND
MASSOJET UNDER BODY BUDDY
DIRTCOMP
4WD TV
Posts: 510
Joined: Tue Jul 22, 2003 9:42 pm
Location: melbourne

Post by modman »

i don't know how to copy links in here
look in the rover forum under 'poll-travel from rr shocks'
good luck, sam can make you understand too much.
Posts: 1837
Joined: Sat Nov 09, 2002 10:49 am
Location: Brisbane

Post by beebee »

Thanks!
TEAM DGR WEBSITE
TEAM DGR ON FACEBOOK

Sponsors:
SUPERIOR ENGINEERING
LOCKTUP 4X4
UNIVERSAL DRIVESHAFTS QUEENSLAND
MASSOJET UNDER BODY BUDDY
DIRTCOMP
4WD TV
Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests