Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Hi flow injectors for 4.5 GU petrol

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
User avatar
RN
A speed camera would have prevented that!
Posts: 15822
Joined: Sat Feb 05, 2005 3:46 pm
Location: Check your six.

Hi flow injectors for 4.5 GU petrol

Post by RN »

Mate has a turbo Gu 4.5 petrol. He is concerned that the current injectors may be too lean at boost.

any ideas on the best type of injectors that can be substituted and what is the flow and electrical capacity of each.

cheers

RN
I am the Nightrider! I am the chosen one. The mighty hand of vengeance, sent down to strike the unroadworthy!
Top
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Contact:
Contact cloughy

Post by cloughy »

Is it to lean on boost? does it ping? best to give it a dyno run and check A/F ratio, then see what to do, Standard ECU?? tried rising rate reg??
Wanted: Car trailer or beaver tail truck, let me know what you got
Top
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Contact:
Contact cloughy

Post by cloughy »

cloughy wrote:Is it to lean on boost? does it ping? best to give it a dyno run and check A/F ratio, then see what to do, Standard ECU?? tried rising rate reg??
:?:
Wanted: Car trailer or beaver tail truck, let me know what you got
Top
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

any more info on it?
im looking into doing it to mine soon hopefully
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Top
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Contact:
Contact cloughy

Post by cloughy »

cloughy wrote:
cloughy wrote:Is it to lean on boost? does it ping? best to give it a dyno run and check A/F ratio, then see what to do, Standard ECU?? tried rising rate reg??
:?:
:roll:
Wanted: Car trailer or beaver tail truck, let me know what you got
Top
User avatar
RN
A speed camera would have prevented that!
Posts: 15822
Joined: Sat Feb 05, 2005 3:46 pm
Location: Check your six.

Post by RN »

cloughy wrote:
cloughy wrote:
cloughy wrote:Is it to lean on boost? does it ping? best to give it a dyno run and check A/F ratio, then see what to do, Standard ECU?? tried rising rate reg??
:?:
:roll:
Ok, my mate got back from Griffith on Friday and I put the questions to him. It doesn't ping, it has a piggyback ECU, but it has a history of being too lean in the past. Heat has always been suspect and he would prefer it to be on the rich side. Has lost faith with the original turbo fitter and tuner.

He believes that it should have 555cc injectors , side entry type of 10 to 14 ohms resistance. If this is of not much value I can forward his email via a PM.
I am the Nightrider! I am the chosen one. The mighty hand of vengeance, sent down to strike the unroadworthy!
Top
Posts: 1918
Joined: Mon Sep 26, 2005 6:03 pm
Location: Victoria

Post by Jimbo »

I hear that the nissan GTR injectors fit straight into a tb42e fuel rail. If the tb45 has the same or similar rail then he may be in luck.
Has he tried using a rising rate fuel reg???

Let me know how this all goes as i will be in a similar boat soon. What piggy back ecu does he use?

Jimmy
GQII Patrol YAY!!
Top
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Contact:
Contact cloughy

Post by cloughy »

Jimbo wrote: Has he tried using a rising rate fuel reg???


Jimmy
;)
Wanted: Car trailer or beaver tail truck, let me know what you got
Top
Posts: 1918
Joined: Mon Sep 26, 2005 6:03 pm
Location: Victoria

Post by Jimbo »

"Has he tried using a rising rate fuel reg???"
EHhehehe sorry
GQII Patrol YAY!!
Top
User avatar
RN
A speed camera would have prevented that!
Posts: 15822
Joined: Sat Feb 05, 2005 3:46 pm
Location: Check your six.

Post by RN »

Jimbo wrote:"Has he tried using a rising rate fuel reg???"
EHhehehe sorry
Not sure..will have to get back to him on that one...EFI and turbo is just so not me at hte moment...I'm stuck in the 93 Mav carby world. :cry:
I am the Nightrider! I am the chosen one. The mighty hand of vengeance, sent down to strike the unroadworthy!
Top
Posts: 805
Joined: Thu Sep 18, 2003 6:07 pm
Location: lost

Post by fatassgq »

tb42 & tb45 are not the same injector type. tb45 are side feed things.

If he wants to go down this route there is some that will fit I just can't remember from what car. Maybe a skyline or something?

Prolly a good injector clean/supply mob would be able to help here.

Another option would be to get a fuel injector rail made up to use much cheaper top feed style injectors like the older style.
Would be a multitude of options for injectors then.


Cheers
Brian
Top
User avatar
RN
A speed camera would have prevented that!
Posts: 15822
Joined: Sat Feb 05, 2005 3:46 pm
Location: Check your six.

Post by RN »

Thank you all for your response...I am going to refer your comments to him and hopefully he can digest what is to be done.
:armsup:
I am the Nightrider! I am the chosen one. The mighty hand of vengeance, sent down to strike the unroadworthy!
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest