Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

new and question

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 16
Joined: Sun Jan 21, 2007 9:39 am
Location: Holland (Europe)

new and question

Post by patrick4x4 »

Hello,

I'm Patrick from Holland. I have 4 suzuki's (Samurai, SJ413K, LJ80V and LJ80Q).
I'm trying to fit a Suzuki Baleno 1.8 16v engine into my SJ413 Pick Up.
Somebody at Zuwharrie.com told me that maybe someone on this forum could help me out!
I'm looking for the right transmission. I know the 1.8 16v engine (J18a) and the Vitara 2.0 16v (j20a) transmission are a good match.
But finding one overhere is very difficult (they are all still on the road :cry: ).
I can get my hand on the transmission of a Vitara 2.0 V6 engine, but I doubt if it will fit the J18a engine.
Before I signed up I've read some threads about the J18a engine, but I couldn't find what transmission will fit.
Hope you can help me...
Thanks!

Patrick
Top
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

:D
Last edited by want33s on Mon Dec 17, 2007 11:07 pm, edited 1 time in total.
Top
Posts: 105
Joined: Wed Jul 09, 2003 9:43 pm
Location: newcastle

Post by PAZZ »

hey, im pretty sure leam from big balls offroad has this engine is his zook, somone might be able to put you in touch with him.
chicks dig panel damage
Top
User avatar
cj
Posts: 1913
Joined: Tue Jul 01, 2003 10:30 pm
Location: Melbourne

Post by cj »

Here's a build with a 2.0 (J20A) which is basically the same engine as the 1.8 (J18A) in front of a 1.6 trans
http://members.cox.net/aftermarket4x4/2 ... acker.html

Here is the 2.0 in a Sierra/Samurai in front of the Sierra 5 speed. http://members.cox.net/aftermarket4x4/2liter.html Trail Tough offer a kit for this.

From the parts diagram the V6 has a different bellhousing to the 2.0 4cyl but the trans itself appears to be basically the same. You would need to do some more investigating on this one.
[quote="4WD Stuff"]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
Top
Posts: 4825
Joined: Sun May 04, 2003 6:33 pm
Location: Berwick vic

Post by droopypete »

My research tells me that a 2.0L 4cyl will bolt up to a 1.6L transmission.
this is research only, I haven't bolted them together myself yet but they are both in the shed ready to go.
Peter.
Cable bracing is the way of the future!

v840 said "That sounds like a booty fab, hack job piece of shit no offence."
Top
Posts: 16
Joined: Sun Jan 21, 2007 9:39 am
Location: Holland (Europe)

Post by patrick4x4 »

Thanks for all the info so far! I always figured the 1.8 Baleno/Esteem engine wouldn't match the 1.6 Vitara/Tracker gearbox.
In this thread is says the bellhousing configurations are very different:

http://www.outerlimits4x4.com/viewtopic ... ght=baleno

But if the 1.8 Baleno and 2.0 Tracker engine are basically the same it should fit according to the article of Aftermarket4x4.

I'm a bit more optimistic now!

I think I must find someone who'll lend me the bellhousing of a Vitara 1.6 gearbox so I can try if it is a match!
Top
Posts: 16
Joined: Sun Jan 21, 2007 9:39 am
Location: Holland (Europe)

Post by patrick4x4 »

Problem solved!
I found an adaptor plate!!!
Top
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

question

Post by want33s »

Would you like to share with us the name of the adaptor supplier and its cost? ta jas
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 3 guests