Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Part Time VS Full Time 4wd?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 63
Joined: Sat Jan 24, 2004 5:14 pm
Location: sydney

Part Time VS Full Time 4wd?

Post by frontyMatt »

With standard LCs having part time 4wd does this cause increased ware one the rear pinion and diff, compared to an AWD variant that divides torque between two diffs?


-I know the 1HZ doesn’t put out huge numbers… but with an aftermarket turbo added would the drivetrain cope as well as an AWD would?


Matt,
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Re: Part Time VS Full Time 4wd?

Post by dumbdunce »

frontyMatt wrote:With standard LCs having part time 4wd does this cause increased ware one the rear pinion and diff, compared to an AWD variant that divides torque between two diffs?


-I know the 1HZ doesn’t put out huge numbers… but with an aftermarket turbo added would the drivetrain cope as well as an AWD would?


Matt,
the rear diff is large and quite strong, it can cope fine with extra power. Driving habits have far more to do with diff damage than the actual power/torque run through them. it is quite possible to destror the diff with a regular 1HZ, and it's also quite possible for it to last 300,000km with an intercooled turbo pushing 550Nm and 200kW - it's how you apply the power that makes the difference.

cheers

DD
Free air locker to the first 20 callers!
Posts: 63
Joined: Sat Jan 24, 2004 5:14 pm
Location: sydney

Post by frontyMatt »

thanks mate,

.....good answer :D
Posts: 1254
Joined: Mon May 16, 2005 8:21 pm
Location: Sth Brissy

Post by LuxyBoy »

frontyMatt wrote:thanks mate,

.....good answer :D
He is DD the Yota Oracle....... he always has the answer.
Kind Regards,
Brad
Posts: 2621
Joined: Mon Nov 29, 2004 7:46 pm
Location: Springwood, Between Brisbane and GC

Post by Suspension Stuff »

There is more slop with and all wheel drive but in my opinion it drives better. I did a part time conversion but in time I will go back to full time.

If you have anything more than a 2 or 3 inch lift I would go part time.

It is also more handy for full time as you don't have to get out :x

Personally I think there are both advatages and disadvantages for both concerning strength as backlash would be wearing I would suggest.

Shane
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
Post Reply

Who is online

Users browsing this forum: No registered users and 51 guests