Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Winch wiring and battery charging
Moderator: -Scott-
Winch wiring and battery charging
I have a 9500lb winch to fit after I've made a bar. Specs recommend a 650 cca battery so I got a 700cca. What is the best setup to charge both standard and winch battery but only use winch battery for winching? Most setups isolate second battery when ignition is on, I don't want this. I've seen several different setups here but which is the most reliable and cost efficient? Redarc ....ARB.... etc
Re: Winch wiring and battery charging
Most setups isolate 2nd batt when off and charge when on, that is the normal procedure.want33s wrote:I have a 9500lb winch to fit after I've made a bar. Specs recommend a 650 cca battery so I got a 700cca. What is the best setup to charge both standard and winch battery but only use winch battery for winching? Most setups isolate second battery when ignition is on, I don't want this. I've seen several different setups here but which is the most reliable and cost efficient? Redarc ....ARB.... etc
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Not the cheapest or the easiest but it definetely works well
TJM IBS
http://www.outerlimits4x4.com/viewtopic.php?t=99954
TJM IBS
http://www.outerlimits4x4.com/viewtopic.php?t=99954
Who is online
Users browsing this forum: No registered users and 1 guest