Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

rear diff noise

Tech Talk for Jeep owners.

Moderator: GUtripper

Post Reply
Posts: 1
Joined: Sun Nov 23, 2003 12:28 pm
Location: brisbane

rear diff noise

Post by jodeyb »

Hi guys i have a 99 jeep cherokee. Whan u take off hard from a standing start, or when taking off around a corner, I have a clunking from the rear diff.
I have sent it back to jepp numerous times, the last time they changed the lsd clutches. Even though its not as bad it still does it.
Anyone else have this problem?

cheers
Posts: 135
Joined: Tue Mar 04, 2003 7:01 pm
Location: West Gippsland

Post by OzJeeper »

Check the control arm rubbers.
Check the drive shaft/s for play.
Non-funded retiree.
Posts: 1544
Joined: Tue Oct 22, 2002 8:37 am
Location: Performing booty fab in my Garage

Post by Wooders »

I wager you need to lubricate the output splines from teh transfer case.
Remove the rear driveshaft, clean & grease the output shaft splines & refit rear driveshaft...simple job - should take 15minutes whilst sipping your favourate beer....

Also check the bushes etc mentioned above - but I'll still wager that this is the problem ;)
Cheers [url=http://www.wooders.com.au]Wooders[/url]
Posts: 9
Joined: Thu May 27, 2004 3:40 pm

Post by tweety jeep »

Does this sound always happen? Or is it only every so often? Mine does the same.. But jeep said it was loose u bolts ( ? ) WTF?? Checked almost everything. Havent checked the front half of the jeep yet!
Posts: 469
Joined: Wed Sep 24, 2003 12:40 pm
Location: Redcliffe/Brisbane

Post by Timmy »

i rekon uv chewed out the rear uni....;)
Posts: 1
Joined: Tue May 18, 2004 9:44 am

Post by Michael Fisher »

Have a look at were your axle housings enter the pumkin and see if they have moved. Also does it happen all the time.I also had to replace my front drive shaft which was flogged out and it seemed to fix the problem but it was only a co-incidence because the noise returned.
Post Reply

Who is online

Users browsing this forum: No registered users and 23 guests