Hey everyone
I am slowly building up a FJ45 Single Cab Cruiser. What suspension setup should i use, its going to be used for serious four wheel driving only.
Thanks
Jason
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
FJ45 Suspension
Moderators: toaddog, Elmo, DUDELUX
FJ45 Suspension
Win if you can, Loose if you must, but never give up !!!!
Lots - Nah not really
What could i do for $1000-2000?
Win if you can, Loose if you must, but never give up !!!!
depending how extreme and how much travel you want you can just reset your springs, run longer shackles and get new shocks. This is pretty cheap and easy. Use caster correction wedges in the front if you use longer shackles. For the back you can take most of the leaves out and add coils as well as longer shackles. This is really cheap and really easy. You should be able to get hold of some secondhand coils for free. Old Range Rover or Peugo ones work well. You might need to cut the coils to length if they are too long. I had the leaf / coil setup in my old 45 series ute and it flexed ok and had a super smooth ride.
For more money and work you could do a springover. Note that you can run the reset springs, longer shackles and coil / leaf setup easily and cheaply. The springover is a lot more involved and complicated. You would also need approval from the TAC for the springover if you wanted it registered.
What engine are you running?
For more money and work you could do a springover. Note that you can run the reset springs, longer shackles and coil / leaf setup easily and cheaply. The springover is a lot more involved and complicated. You would also need approval from the TAC for the springover if you wanted it registered.
What engine are you running?
Who is online
Users browsing this forum: No registered users and 0 guests