Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

who will put my gu steering box into my gq

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 75
Joined: Sat Nov 18, 2006 1:25 pm
Location: vic

who will put my gu steering box into my gq

Post by winchin »

i need somebody to put my gu steering box into my gq asapas i dont have any time
standard gq no mods ??? hehehe
Top
Posts: 736
Joined: Mon Mar 07, 2005 5:25 pm
Location: Redcliffe, Brisbane

Post by chops »

takes under an hour if you have half a brain and a decent set of tools
1988 351W GQ wagon
Top
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

I recon I can do it in 20 minutes, 4 steer box bolts in chassis 1 tie rod 1 bolt in collar for flex joint 2 banjo bolts for fluid, fill the fluid res n go for a drive
Top
Posts: 1153
Joined: Sat Apr 24, 2004 10:17 am
Location: Gold coast QLD

Post by Madmac »

took me about 40 mins to do mine
Top
Posts: 94
Joined: Tue Apr 18, 2006 8:25 pm
Location: South West VIC

steerin box

Post by joe crothers »

winchin must be to busy WINCHIN him self :twisted: :twisted:
Top
Posts: 4426
Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast

Post by bru21 »

take longer than 20 mins to order the 2 new drag links you will need! gu and gq have different taper on the TRE's
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Top
Posts: 104
Joined: Thu Jan 26, 2006 2:07 pm
Location: Gippsland vic

Post by Fozdick »

just use a GU drag link, i will help . PM if needed.

Shaun.
TB SLUG. Dints, Cracks, Scratches, Rust, Mud, Broken Bits and Rattles.
Top
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

how much difference in taper? which one is more acute?
Top
Posts: 75
Joined: Sat Nov 18, 2006 1:25 pm
Location: vic

Post by winchin »

well who wants to do it for me ???
standard gq no mods ??? hehehe
Top
Posts: 140
Joined: Sun Nov 07, 2004 10:23 am
Location: Eastside Vic

Post by Goutman »

winchin must be to busy WINCHIN him self
:roll: :roll: :roll: :roll:
Top
Posts: 4426
Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast

Post by bru21 »

no you can't just use a gu drag link - well you can if you are happy for the gq end to bolt up so hard there is no movement whatsoever in the joint. gq has a bigger taper, gu is smaller. gq has a bigger thread on the tre if you are making one too. you need a gq to gu drag x2
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Top
Posts: 897
Joined: Tue Aug 02, 2005 2:31 am
Location: Central Coast

Contact:
Contact MyGQ

Post by MyGQ »

Question.

I have a Snake Racing Steering arm with replaceable ends. if i get a GU steer box could i just replace the end for the GU pump with a GU end for a Snake racing arm?
AA's for Quitters
Top
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

should be able to
Top
Posts: 4426
Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast

Post by bru21 »

no you cannot as I said above they are different threads I think form memory gq is 22mm and gu is 20mm
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Top
Posts: 1153
Joined: Sat Apr 24, 2004 10:17 am
Location: Gold coast QLD

Post by Madmac »

bru21 wrote:no you cannot as I said above they are different threads I think form memory gq is 22mm and gu is 20mm
i bolted the GQ tie rod into a GU box, it seemed to fit OK, its been on for 12 months and there doesent appear to any movement or wear there. however when i spoke to Snake racing 12 months ago they said they were getting some GU tie rod ends made up with the same size thread as the GQ rod ends. it might be worth giving them a call to see if these are available yet.
Top
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

bru21 are you talkin about the thread on the taper ot the male threaded TRE"s I use female threaded tie rods n they are interchangable on the gq to gu sit in the same position from knuckle to TRE ball joint n taper apears to be the same never had 1 come loose n what I can measure with the vernier is right
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 5 guests