Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
does anybody know the difference between the cv and axle on a coil sprung diff or the leaf sprung diff
I went to replace my short axle and cv (snaped the axle the other weekend) and when i put the cv in and did the stub axle up, it put that much pressure on the cv that i was unable to turn it Brass washer is on the right way and everything else appears to be fine.
Didnt even think of coil/leaf cv differences at the time. Some one mentioned it and it seems to make sense.
Is the cv the same and the axle different, vica versa or both
leaf n coil have same cv but different long axle lenth, leaf is about 25mm shorter then coil on long but same on short, I have a leaf long if some one wants to buy one
Brass washer is on the right way and everything else appears to be fine. 