Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

challenge class - ccda rules

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 64
Joined: Sun Dec 03, 2006 12:48 pm
Location: Yarra Valley

challenge class - ccda rules

Post by backyard_racer »

challenge class rules
4.5.14 body

The body of the make of the vehicle shall be readily recognised and shall be the same manuafcturer as the chassis.

the combination of body and chassis may be updated with body and chassis elements from later models of the same make of vehicle.

taken from revision 7.0

so this would mean my #40 series cruiser;

cannot go on a GQ chassis???

but can go on an #80 or #100 series chassis?????


thanks luke.

edit: change from revision 5.1 to 7.0
Last edited by backyard_racer on Wed Jun 06, 2007 8:12 pm, edited 1 time in total.
Posts: 90
Joined: Tue Oct 10, 2006 2:18 pm
Location: Brizvegas

Post by Mechz »

I don't really know much about comps but I know how to read and your analogy is correct. No Tojo series bodies on Nissan chassis.
92' NH Pajero SWB 3.0 V6
Posts: 273
Joined: Fri Jul 30, 2004 6:39 pm
Location: cranbourne

Re: challenge class - ccda rules

Post by embryo »

backyard_racer wrote:challenge class rules
4.5.14 body

The body of the make of the vehicle shall be readily recognised and shall be the same manuafcturer as the chassis.

the combination of body and chassis may be updated with body and chassis elements from later models of the same make of vehicle.

taken from revision 5.1

so this would mean my #40 series cruiser;

cannot go on a GQ chassis???

but can go on an #80 or #100 series chassis?????


thanks luke.
id say you've got the idea
dont tell the missus
Posts: 849
Joined: Fri Apr 23, 2004 12:30 pm
Location: Mornington, Vic

Post by MYTTUF »

Dude
It'd pay to check the current regs but I think you'll find them the same.
Jonesy
80 series, Locked both ends, Q78ed & a massive 57 k/w to boot!!!!

www.autobalance.com.au
Posts: 64
Joined: Sun Dec 03, 2006 12:48 pm
Location: Yarra Valley

Post by backyard_racer »

yeah that is what i was thinkin. but had thought it had been done before.

so to get coils i can use a latter model landcrusier chassis #80 or #100 because it remains a toyota landcrusier just different models.

i know it may sound like a stupid question.

luke
Posts: 542
Joined: Thu May 05, 2005 8:53 pm
Location: Lysterfield

Post by krimnl »

will all change now anyway ,
since outback was won by a toyota chassis with a suzuki body.
Posts: 2809
Joined: Mon Jan 02, 2006 5:03 pm
Location: Lara Victoria

Post by Ruffy »

krimnl wrote:will all change now anyway ,
since outback was won by a toyota chassis with a suzuki body.
*ar hmm.. Cough cough*
[quote="Uhhohh"]As far as an indecent proposal goes, I'd accept nothing less than $100,000 to tolerate buggery. Any less and it's just not worth the psychological trauma. [/quote]
Posts: 1676
Joined: Tue Oct 22, 2002 9:26 am
Location: brisbane

Post by 1MadEngineer »

mate dont worry about it rules aren't really rules, just basic guidelines

EG:
The ARB Warn Outback 4x4 Challenge is a CCDA Class A event and as such accepts vehicles in the Challenge Class only.
Check our supplementary rules for full details as we do have some additional requirements/allowances which are different from the basic Cross Country Driver's Association rules.
Also note the positions on the vehicles which are to be used for car number identification and sponsor stickers. The rest of the vehicle is available for your own decals. Click here to view a diagram of sticker placement.

Challenge Class*

* Tyre Max 37.5 x 13.5
* Diff locks are permitted
* Roof racks are permitted
* Custom suspension permitted
* Cargo barriers must be fitted in wagons
* Roll cage is compulsory
* Harnesses and helmuts are compulsory
* Engine may be modified or changed
* Bodies can be modified and lifted

*Changes to the vehicle must not compromise the vehicles roadworthiness.

the outback lets the QLD cars run, yet there are more than a few that would easily be excluded due to this ruling. and the same goes with nearly all the comps. It is just a constant struggle to see how far you can push it or who you know!

eg, there is nothing in the rules that states the percentage of chassis required or where it has to be mounted (you could have 4" of it where the chassis number is kept in the glovebox) and all it relates is that 50% of the side area in a square is required. therefore all you need is a pair of front gaurds and you have ~50% of a ute!!!! this works especially well seeeing that QLD cars dont go for annual roadworthy's. therefore a (theoretically) resistered moonbuggy is just as unroadworthy as a GQ with fibreglass gaurds or 3"+ lift. it is either legal or not there should be no grey areas.
this is why the rockcrawling (werock/ozrock/xrcc) rules are better as they as much more specific and well thought out.[/b]
Last edited by 1MadEngineer on Thu Jun 07, 2007 11:47 am, edited 1 time in total.
WWW.TEAMDGR.COM
WWW.SUPERIORENGINEERING.COM.AU
WWW.LOCKTUP4X4.COM.AU
Posts: 542
Joined: Thu May 05, 2005 8:53 pm
Location: Lysterfield

Post by krimnl »

Ruffy wrote:
krimnl wrote:will all change now anyway ,
since outback was won by a toyota chassis with a suzuki body.
*ar hmm.. Cough cough*

ooops did i say that or just think it???
Posts: 64
Joined: Sun Dec 03, 2006 12:48 pm
Location: Yarra Valley

Post by backyard_racer »

krimnl wrote:will all change now anyway ,
since outback was won by a toyota chassis with a suzuki body.
that was kinda my thinkin but without getting into the "obc 07" discussion.

i guess it will be easier just to use th patrol body. then i comply.
Posts: 1676
Joined: Tue Oct 22, 2002 9:26 am
Location: brisbane

Post by 1MadEngineer »

so why do we bother going to a CCDA "sanctioned" event????
if we do think there is a legitimate discretion of the rules, the CCDA has no formal tribunal that is willing to put there hand up and ACTUALLY STICK to 'THEIR' rules if a LEGAL complaint was made through the proper channels.

CCDA should take a leaf from others that have done the hard yards and get some balls!!!
Imagine going to a comp, fitting into the rules, winning. then being told you are banned. only to find out that the person in 2nd place who put in the protest had a financial / personal interest in the event or with its organisers.

If that sort of crap is going to be allowed then i think my company should sponsor TT so that i can win!! (as if thats going to happen).

Get your rules right, no grey areas, or at least be preparred for people with a brain to build right to the edge, and dont penalise them!!!
If you are going to charge to sanction an event, then make sure you have a representitive on site to edjudicate over disputes, and make them liable for their discissions as well, motorsport in aus is coming ahead in leaps and bounds, and if you are going to run and organisation that want to control their little part in it then do it properly!!!

sorry about my rant, but i want to know that my money each year isn't just going to "overpriced - insurance brokers" but to enthusiastic 4wd'ers!!!!!!!!!!!
WWW.TEAMDGR.COM
WWW.SUPERIORENGINEERING.COM.AU
WWW.LOCKTUP4X4.COM.AU
Post Reply

Who is online

Users browsing this forum: No registered users and 143 guests