Hi
i want to add some 55w broadbeam lights to the rear for much brighter reverse lights and work lights when setting up camp etc.
Can i run these directly off the wiring harnes for the towbar to supply power and on off operation. are the wires there able to power lights this size.
do i legally need to run a seperate switch? or can i just have them hooked up so when i select reverse gea they will be on?
thanks for the help
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
additional reverse lights
Moderator: -Scott-
Re: additional reverse lights
No.danman-gq wrote:Hi
i want to add some 55w broadbeam lights to the rear for much brighter reverse lights and work lights when setting up camp etc.
Can i run these directly off the wiring harnes for the towbar to supply power and on off operation. are the wires there able to power lights this size.
Use the existing reverse light power line to switch a relay with a fused power line direct from the battery.
The rest of it is being discussed - again - in another post.
Who is online
Users browsing this forum: No registered users and 8 guests