Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

what starter for 1.6 conversion?

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 140
Joined: Sat Nov 18, 2006 3:52 pm
Location: on a rock near you

what starter for 1.6 conversion?

Post by muz_ook »

just a quick question,.....

i looked in the bible and done a search but cant find the answer to my Q?

what starter motor do you use when you do a 1.6l conversion using the 1.3 5 speed? is it the 1.3 starter??
thanks any help is appreciated!!

Muz.
[img]http://i122.photobucket.com/albums/o268/muzook/RedX.gif[/img]
Top
User avatar
NIK
Posts: 974
Joined: Wed Aug 13, 2003 12:13 pm
Location: Newcastle

Post by NIK »

I have carby 1600 with 1300 5 speed with no adapter plate. I used the 1300 starter motor, I had to grind a small piece on the back of the starter and a little on the rib on the block.
Nik
Top
Posts: 140
Joined: Sat Nov 18, 2006 3:52 pm
Location: on a rock near you

Post by muz_ook »

NIK wrote:I have carby 1600 with 1300 5 speed with no adapter plate. I used the 1300 starter motor, I had to grind a small piece on the back of the starter and a little on the rib on the block.
Nik
ive got the g16b block is it the same deal??

so there isnt much grindin involved?

thanks
Muz.
[img]http://i122.photobucket.com/albums/o268/muzook/RedX.gif[/img]
Top
Posts: 5634
Joined: Sun May 08, 2005 10:07 pm
Location: diagonally parked in a parralell universe

Post by fool_injected »

The grinding required is fairly minor
Fit it up and you will see where you need to remove the meat
There is a photo in a thread from the last six moths somewhere in Outers cyberspace
[url=http://www.4x4masters.com.au/]Australian 4X4 Masters Series website[/url]

non illegitimi carborundum!

[url=http://www.suzuki4wd.com.au/forum/]Suzuki 4wd Club of NSW forum[/url]
Top
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

are u using the adapter plate? i did and used the vit starter that came with it.
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Top
Posts: 140
Joined: Sat Nov 18, 2006 3:52 pm
Location: on a rock near you

Post by muz_ook »

nah no adapter plate,havent got my starter yet ill get it on the weekend.

thanks
Muz.
[img]http://i122.photobucket.com/albums/o268/muzook/RedX.gif[/img]
Top
User avatar
NIK
Posts: 974
Joined: Wed Aug 13, 2003 12:13 pm
Location: Newcastle

Post by NIK »

Not sure on the g16b but on the g16a its minimal. I was sceptical until I had it infront of me I took a little off the back of the starter body till it was all flush then a little off the rib on the block. I havnt got any pics sorry. When its infront of you you,ll see what I mean.
Nik
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 2 guests