Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

HZJ79 front locker

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 172
Joined: Sat Oct 07, 2006 3:08 am
Location: Ottawa, Canada

Contact:
Contact lshobie

HZJ79 front locker

Post by lshobie »

Hi Guys, I'm located in Canada and I need some advice on a front locker for my 2003 HZJ79 ute.

Will an HDJ81 fron e locker fit the newer front end on my HZJ79? Or do I have to get an elocker (OEM) specific for the HZJ79?

Thanks.
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Im fairly certain the 80 series complete front 3rd will fit but you do need to modify your housing slightly to accomidate the locking mechanism. This will be the same if you use the 79 series factory locker as well.
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

Second that.....mod the housing for the extra bit off the locker to fit in the hole and drill and tap a few extra stud holes and your there....the ratio is thesame (4.1) and the front uses std axles.
Andrew
Top
Posts: 172
Joined: Sat Oct 07, 2006 3:08 am
Location: Ottawa, Canada

Contact:
Contact lshobie

Post by lshobie »

Thanks very much guys, the locker goes in this fall.

Regards.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest