Cooma, round 3 of The Engel Series, and The Vic Winch Challenge are comimg up and require marshalls. If you are planning to help or want to find out more then post your intention or question below.
Jonesy
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Winch Challenge Marshals required
Moderator: evanstaniland
Winch Challenge Marshals required
80 series, Locked both ends, Q78ed & a massive 57 k/w to boot!!!!
www.autobalance.com.au
www.autobalance.com.au
We have in place a training program that we have been slowly introducing. It's forever evolving with all marshals at VWC will be req to do the training on the 21st, eyeball their stages and therefore be not only up to date with current rules, but also very familiar with their stages. This, the training, would normally be 2-3 weeks prior but due to long weekend and 4wd show it's earlier.
We are always trying new ideas and due to the last couple of Vic events being less than perfect, this is another "method" we plan to use to achieve a perfect event, marshal wise.
Oh and as some of the usual helpers will be competing, some of the usual competitors will be helping, it will give those doiung different tasks the chance to familiarise themselves with newer roles.
Now to answer your 2 part question..... yes/no.
Jonesy
We are always trying new ideas and due to the last couple of Vic events being less than perfect, this is another "method" we plan to use to achieve a perfect event, marshal wise.
Oh and as some of the usual helpers will be competing, some of the usual competitors will be helping, it will give those doiung different tasks the chance to familiarise themselves with newer roles.
Now to answer your 2 part question..... yes/no.
Jonesy
80 series, Locked both ends, Q78ed & a massive 57 k/w to boot!!!!
www.autobalance.com.au
www.autobalance.com.au
Cheers Jonsey. Keep up the good work
I'll be able to help out on the Saturday night/Sunday if needed. Due to work i won't be able to get up on the Friday night or Saturday.
Let me know if this helps.
Let me know if this helps.
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
Jonsey,
Just say i ask our 4wd club guys (which i will next week and probably get some results) what do i tell them is expected of them for vic winch?
As in what sort of time is required for the training? When and where will the training take place? What amount of time do they need to commit to on the weekend? What duties will be expected of them? And lastly of course what's in it for them, as in free lunch's etc???
Cheers Dan.
Just say i ask our 4wd club guys (which i will next week and probably get some results) what do i tell them is expected of them for vic winch?
As in what sort of time is required for the training? When and where will the training take place? What amount of time do they need to commit to on the weekend? What duties will be expected of them? And lastly of course what's in it for them, as in free lunch's etc???
Cheers Dan.
[quote="Uhhohh"]As far as an indecent proposal goes, I'd accept nothing less than $100,000 to tolerate buggery. Any less and it's just not worth the psychological trauma. [/quote]
Dan
Marshals at the VWC will need to have completed the training and working bee being held on the 21st October to brush up or learn the rules. They decide how much time they can dedicate to the event and will be alloted stages acordingly and will be fed the same as the teams do during the event.
Jonesy
Marshals at the VWC will need to have completed the training and working bee being held on the 21st October to brush up or learn the rules. They decide how much time they can dedicate to the event and will be alloted stages acordingly and will be fed the same as the teams do during the event.
Jonesy
80 series, Locked both ends, Q78ed & a massive 57 k/w to boot!!!!
www.autobalance.com.au
www.autobalance.com.au
So they need to go to Yea on the 21st of October for the working bee and some training. Ok.. I'll ask at our next meeting.
[quote="Uhhohh"]As far as an indecent proposal goes, I'd accept nothing less than $100,000 to tolerate buggery. Any less and it's just not worth the psychological trauma. [/quote]
Well so far I have a few helpers on the list but more are still required. If you wanna get involved and watch the action close up, now is the time to stand up and be counted.
You'll have a great weekend with the best seats in the house, camp and mingle with competing teams, get fed and you may even get to pre-drive some tracks.
Post up if you're keen
Jonesy
You'll have a great weekend with the best seats in the house, camp and mingle with competing teams, get fed and you may even get to pre-drive some tracks.
Post up if you're keen
Jonesy
80 series, Locked both ends, Q78ed & a massive 57 k/w to boot!!!!
www.autobalance.com.au
www.autobalance.com.au
You'll need to attend the training/working bee weekend on the 20th 21st October, become a CCDA member, then turn up for the event. If you can russel up some buddies that are also keen and form a crew that'd be great. We'll group everybody and fine tune the training weekend when I know how many are coming.
Jonesy
Jonesy
80 series, Locked both ends, Q78ed & a massive 57 k/w to boot!!!!
www.autobalance.com.au
www.autobalance.com.au
Jonesy Im in and a few from www.mudrhino.com.au are expressing intrest as well. Will send in my membership form tomorrow for the CCDA memebership.
The question a few of the guys had also was how many people do you need? do they just become a CCDA member and turn up at the training day?
The question a few of the guys had also was how many people do you need? do they just become a CCDA member and turn up at the training day?
www.mudrhino.com.au
Dwayne,
It'd be good if you TMR guys could get b/w 6 & 8 people. You would then all be able to run stages on Fri, Sat or/& Sun as a group. Everyone will need to be CCDA members and we need to now who's planning on attending the training so please email training@ccda.info .
Jonesy
It'd be good if you TMR guys could get b/w 6 & 8 people. You would then all be able to run stages on Fri, Sat or/& Sun as a group. Everyone will need to be CCDA members and we need to now who's planning on attending the training so please email training@ccda.info .
Jonesy
80 series, Locked both ends, Q78ed & a massive 57 k/w to boot!!!!
www.autobalance.com.au
www.autobalance.com.au
Jonesy I will give a week or two over there to get some numbers up and will let you know how many we get but so far we have 2 that are 100% for the three days.MYTTUF wrote:Dwayne,
It'd be good if you TMR guys could get b/w 6 & 8 people. You would then all be able to run stages on Fri, Sat or/& Sun as a group. Everyone will need to be CCDA members and we need to now who's planning on attending the training so please email training@ccda.info .
Jonesy
www.mudrhino.com.au
I've sent all you keen people PMs. Please get back to me asap to so I can finalise the training weekend. For thoise still keen to help, post up your intentions.
There will be 2, 1 day courses but those keen enough and want to stay are more than welcome as we have a bit to get thru over the weekend.
Jonesy
There will be 2, 1 day courses but those keen enough and want to stay are more than welcome as we have a bit to get thru over the weekend.
Jonesy
80 series, Locked both ends, Q78ed & a massive 57 k/w to boot!!!!
www.autobalance.com.au
www.autobalance.com.au
Who is online
Users browsing this forum: Bing [Bot], Google [Bot] and 4 guests