Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Trailer hitch pivot A frame mount

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 450
Joined: Wed Jun 30, 2004 3:54 am
Location: richmond nsw

Trailer hitch pivot A frame mount

Post by tozook »

i now this has been does before as it was on POS old extra cab comp hilux but my qustion is will the mount be ok to use in a DD hilux

he is RUFF tread on pirate4x4 forum
http://www.pirate4x4.com/forum/showthread.php?t=87706

here some pic's
Image
Image
Image
Offering a service for General welding, parts and suspension kit install, modification such as spring over axle, Solid axle swaps etc
sik_toys@hotmail.com
Top
Posts: 4583
Joined: Fri Jun 11, 2004 5:57 pm
Location: Wheeling in my backyard

Post by sierrajim »

Why not just spend that little bit extra and buy the Dobbin mount?
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
Top
Posts: 450
Joined: Wed Jun 30, 2004 3:54 am
Location: richmond nsw

Post by tozook »

because i don't want to and it's cheap
Offering a service for General welding, parts and suspension kit install, modification such as spring over axle, Solid axle swaps etc
sik_toys@hotmail.com
Top
Posts: 4426
Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast

Post by bru21 »

what about a massive rod end and weld on threaded female boss. similar price and all rotation is in the same plane.

http://www.kartek.com/products/all/heims/heims.htm

available from wizard performance

cheers bru
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Top
User avatar
jav
Posts: 715
Joined: Wed Dec 03, 2003 10:19 am
Location: walloon, queensland

Post by jav »

same setup has been working on the back of the mog rover for years, I paid $60 for the nylon block that I'm using on my pos.
Top
Posts: 450
Joined: Wed Jun 30, 2004 3:54 am
Location: richmond nsw

Post by tozook »

ok but will it handle being driven ever day
Offering a service for General welding, parts and suspension kit install, modification such as spring over axle, Solid axle swaps etc
sik_toys@hotmail.com
Top
User avatar
POS
Posts: 4318
Joined: Tue Oct 22, 2002 8:52 pm
Location: Perth

Post by POS »

I think it would handle been driven daily, i saw my old lux a few months ago and it was still the original hitch and rubber.

However i don't think you would have any chance of it been engineered for on road use.
Top
Posts: 870
Joined: Sat Jun 03, 2006 5:32 pm
Location: sydney

Post by MART »

Glen Dobbins A frame link , fully engineerable and fully greasable joint provides all the movement you will ever need , coupled with the spherical joint which is also fully greasable and rebuildable if ever required , Cheers Paul.



Image



Image



Image



Image



Image



Image
BLOWNZUK 1.3 efi,sc14 supercharger,hilux diffs,detroit lockers,stage 4 rockhopper,6 point cage,35 muddies.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 5 guests