Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

CV's.

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 203
Joined: Thu Sep 25, 2003 11:28 pm
Location: Rowville. Melbourne

CV's.

Post by Allan Mac »

A few of us are heading down to Tassie early next year & to be on the safe side, we will all be taking a good range of spares, including CV's.

My question is, should I get one from Mitsubishi, or would an aftermarket one be OK? If the aftermarket, any suggestions & where can I get one & what ball park figure re, $$$$. I am in Melb, eastern suburbs.

BTW, have a NL.

Cheers
Top
Posts: 124
Joined: Fri Aug 17, 2007 11:48 am
Location: lonnie

Post by FC3892 »

Hey big fella, im in tassie. and also needing new cv's lol, shoot me a pm if u want to see some spots up the northen end.

and i will read on for some prices aswell, i have been told round the 400 mark
Top
Posts: 47
Joined: Sun Oct 10, 2004 7:01 am
Location: Berwick Victoria

Post by Dash007 »

If there just for spares would 2nd hand (wreckers) be the go ??

Could save some $$$$ and get you out of the Shit.... :lol:


Cheers Dash
If at first you don't succeed, go faster.
Top
Posts: 45
Joined: Tue Sep 18, 2007 7:15 pm
Location: North Brisbane

Post by mattza13 »

Sorry to hijack the thread but... anyone know some good cvs to get for a NE paj?? about to go through second set, before a lift and want some decent ones so they dont break.
Top
Posts: 104
Joined: Wed Feb 16, 2005 2:32 pm
Location: Gold Coast

Post by glenn_c »

DON'T GET AFTERMARKET CV'S
Get second hand from the wreckers, There are two sizes for 2nd gen pajero's but they (the whole assy ie one side) both fit on any Gen 2.
If you can get the larger spline ones as they are slightly stronger. The last of the Gen 2 had the smaller spline cv's fitted. Also usually the left hand side goes first.
Regards Glenn
Pajero GLX 2.8td 255/85/16 BFG muds 265/75/16 BFG AT's, articulator, 2.5inch lift, ball joint flip, rear sway bar disconnect and lots of mods.
Top
Posts: 124
Joined: Thu Jan 02, 2003 9:34 pm
Location: Tyers

Post by Pharb »

Whilst shopping for CV boots the local Mits spare parts gent offered me some complete "Diamond (???)" (Mitsubishi home brand???) CV joints cheaper than genuine boots.

Don't know how good they are though.

Peter H
NJ Pajero 2.8TDI
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 0 guests