Hi all,
Just a quick question. the ole 86 bundy developed a clicking behind the dash that changed with the speed, then the clicking stopped and so did the speedo.
Is the speedo cable easy to replace? Any info would be appreciated as i don't want to just go diving in if it is a bit of a mongrel of a job.
Cheers
Blake
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Speedo Cable
Moderators: toaddog, Elmo, DUDELUX
Shouldn't be to bad dash's are easy than there made out to be done a few at work now and pulling speedo's and so on out of clusters to send away and if it don't want to come loose look for more screws and look in the most stupid place they could put one and it'll be there. may even be able to do it with out pulling it out just feel up around that area for the cable and there just a basic clip.
plenty of parts on the bench
Who is online
Users browsing this forum: No registered users and 64 guests