Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
gday my carbie is a little block up again so no idle
there was a thread a while ago with a spot on the carbie you could blow out with a compresser can anyone give me that link tried searching but no luck
A mechanic mate of mine crossed the leads over to cause a deliberate backfire. Turned it over a few times causing the carby to pop & puff out the crap.
Now things to remember!
1. Take the aircleaner/cover off, we don't want the crap blowing back into the aircleaner!
2. Your not trying to start the engine, just turning it over so the exhaust gases blow back through the carb, to push the crap back out the way it came in.
3. I'm no mechanic so I can't tell you which leads to cross over.
4. I suggest if you know a mechanic get him to help you. Some mechanics might not agree with this, but my mechanic did it for me and it worked.
check ALL vacuum hoses. These have a tendancy to slip off and cause a rough idle...If your air cleaner is in good nick then there shouldn't be any reason why you have crap in your carby....check the simple things first and work up!