Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
1979 hilux
Moderators: toaddog, Elmo, DUDELUX
1979 hilux
Just wondering if a 1990 model hilux cab and gaurds will fit onto a 1979 hilux chassis without to many mods.
Just a wild thought that's not from inside the bubble!:
If they have different chassis widths, I see this as a great opportunity for a 2" body lift using 50 X 100 box tube. Just use the box tube to run front to back on each side under the cab and you can use the same body and chassis mount holes through the 50 X 100 with crush tubes.
50 X 75 might even get you what you want.
I'm sure something easy could be done for the 2 front and 2 rear if on a wagon, mounts with 50 X 50 section running across left to right.
If they have different chassis widths, I see this as a great opportunity for a 2" body lift using 50 X 100 box tube. Just use the box tube to run front to back on each side under the cab and you can use the same body and chassis mount holes through the 50 X 100 with crush tubes.
50 X 75 might even get you what you want.
I'm sure something easy could be done for the 2 front and 2 rear if on a wagon, mounts with 50 X 50 section running across left to right.
I'm the sharpest tool in the shed!
Who is online
Users browsing this forum: No registered users and 133 guests