Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

boat trailer change to 6 stud

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 762
Joined: Tue Oct 26, 2004 6:46 pm
Location: Diamond Creek

boat trailer change to 6 stud

Post by mule75 »

i have a boat trailer for a small tinny and was wondering if anyone knows an cheap and easy way of changing the hubs it has now(just holden 5 stud) to landcruiser 6 stud so i can get a bit more ground clearance by putting an old set of 35 claws i have under it and so i don't have to take an extra spare tyre.
Top
Posts: 3099
Joined: Wed Dec 11, 2002 10:55 am
Location: Central Queensland

Post by BundyRumandCoke »

Just go to somewhere that sells trailer hubs, even Superchaep will do it, and buy a set of 6 stud hubs. The bearings are common, being either Holden or Ford. Change the hubs, then put the new wheels on.
Mud makes excellent toothpaste.
Top
Posts: 73
Joined: Sun Oct 28, 2007 1:40 pm
Location: Melbourne

Post by rodrocket »

i would sugest that you pull one of the hubs & take it with you as from what i have seen Holden hubs can use the standard bearing or the SL bearing if useing a large axle

hope it helps

regards
rod
Top
Posts: 306
Joined: Mon Dec 27, 2004 3:59 pm
Location: Sunny QLD

Post by MattGU »

Hubs are as above but you may need to spring the axle over (if not already) and change the gaurds to fit the 35s
Top
Posts: 762
Joined: Tue Oct 26, 2004 6:46 pm
Location: Diamond Creek

Post by mule75 »

thanks for all the info.
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

Larger tyres means you'll have to back further into water to offload the boat and fit larger guards.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 762
Joined: Tue Oct 26, 2004 6:46 pm
Location: Diamond Creek

Post by mule75 »

Loanrangie wrote:Larger tyres means you'll have to back further into water to offload the boat and fit larger guards.

doesn't worry me to back it in further it's only a three meter tinny so you can almost throw it in. i used to use it as a car topper but i don't have a canopy to suit my tray now that i've changed it a bit. tyres should fit in guards with a soa conversion and maybe some blocks to get it to sit level on my cruiser.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 18 guests