Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GQ warn high mount fit into a arb low mount bar??

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 238
Joined: Fri Aug 24, 2007 8:57 pm
Location: Frankston Melbourne

GQ warn high mount fit into a arb low mount bar??

Post by steveoo »

I have just got a warn 8274 highmount. but i have an arb front bar been told its for a low mount now what i would like to know is... how much will i have to cut of my grill to make her fit.... or am i just pushing my luck!?

steve
Posts: 533
Joined: Sat Jan 15, 2005 4:54 pm
Location: Melbourne, Australia.

Post by InSanE »

i modified my arb non winch bullbar to fit a highmount and i had to cut this mutch out of my grill

Image

Image
GQ LWB TD42, boost, lockers etc

http://forum.mudrhino.com.au/viewtopic.php?t=262&start=30
Posts: 60
Joined: Fri Jun 15, 2007 7:34 pm
Location: newy

Post by paul44b »

Hi, my last bar was a low mount bar the hi-mount fits ok, but you do have to cut grill, just fit the winch to the bar and trial fit it,and then you will see how much you have to cut....Paul
Posts: 202
Joined: Wed Nov 02, 2005 5:51 pm
Location: Morisset

Post by henry »

Yes it will fit but you need to cut a fair bit out of your bar which will weaken it. I reinforced mine with 6mm plate and gusseted either side of the winch mounting holes as well. As well as old mate showed you with the grille.
I ought to report you to the f#cking RSPCA neville.
Post Reply

Who is online

Users browsing this forum: No registered users and 10 guests