Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Sirion bits.... found thanks. Well maybe not!
Moderator: Tiny
Sirion bits.... found thanks. Well maybe not!
Parts found... thanks all.
G'day guys and girls,
I'm looking for a right hand lower ball joint for a 98 Daihatsu Sirion.
Do any of you Daihatsu people know where I'd get one less than Daihatsu's price?
Cheers Jas.
G'day guys and girls,
I'm looking for a right hand lower ball joint for a 98 Daihatsu Sirion.
Do any of you Daihatsu people know where I'd get one less than Daihatsu's price?
Cheers Jas.
Last edited by want33s on Fri Jan 25, 2008 6:23 pm, edited 2 times in total.
I actually found genuine was cheaper than RIPCO - and that WAS a surprise....
From what I gathered about the Daihatsu parts situation, whilst according to press releases from Toyota there are a fair number of dealers supplying - in Vic at least there are two that CARRY stock, the rest just buy in as required and sometimes from interstate as they don't like dealing with their rivals.
When I was after an idler arm one dealer would rather ship from Sydney to Melbourne than buy from the dealer that had stock
May not have a bearing on price but ..........
From what I gathered about the Daihatsu parts situation, whilst according to press releases from Toyota there are a fair number of dealers supplying - in Vic at least there are two that CARRY stock, the rest just buy in as required and sometimes from interstate as they don't like dealing with their rivals.
When I was after an idler arm one dealer would rather ship from Sydney to Melbourne than buy from the dealer that had stock

May not have a bearing on price but ..........
( usual disclaimers )
It seemed like a much better idea when I started it than it does now.
It seemed like a much better idea when I started it than it does now.
Last time i got parts for mine(gearbox mount) the old guy at WARREN TOYOTA told me toyota were phasing out DAI-PARTS and i only got my mount because it was the same as a 96 model.
He also said he could not search for parts using VIN#
I always prefer genunie parts.
Repco/autobahn etc will always be cheap chinese crap.
Pedders gear used to be made by TRW (dont know if they have gone china yet).
He also said he could not search for parts using VIN#
I always prefer genunie parts.
Repco/autobahn etc will always be cheap chinese crap.
Pedders gear used to be made by TRW (dont know if they have gone china yet).
[color=#FF4000][/color]89 rocky V6 2"efs adj/sway&panhard
They'll probably phase out parts as each model passes the 10 YO mark. I think it's law in Australia that spares have to be available for that time period- hence Holden supplying Daewoo parts after they folded. (Plus GM own both companies.)
I'm sort of glad to not own a Daihatsu now as parts in the future might be very hard to obtain (and the aftermarket support isn't very good.)
I'm sort of glad to not own a Daihatsu now as parts in the future might be very hard to obtain (and the aftermarket support isn't very good.)
David
Yeah it is the famous oneMightyMouse wrote:If its the famous keyway one - why not just have it sleeved. How much is a new one ?HotFourOk wrote:My Crank Pulley/Harmonic Balancer is a 4 week wait from Japan

They said it would create a weak point, so opted against it.

New genuine is $280 trade price, which isn't too bad.
[quote="RockyF70 - Coming out of the closet"]i'd be rushing out and buying an IFS rocky[/quote]
If you need parts Daihatsu auto recyclers at archerfield have a good range of parts as thats all they do and they will post any were. I have used them for the past 6 years as i have had a few daihatsus.
I have seen him post stuff to png . Piglet even comes in there for his old truck and his toyroza . his number is 073875255.
If he has not got a part they buy cars 2 times a week from auctoins + private cars . give him a try .
5 daihatsus so far latest f70td ute looks like mini land cruser .
had feroza f310
hijet
mira L200
handi van L80
all ways found him very help full .

I have seen him post stuff to png . Piglet even comes in there for his old truck and his toyroza . his number is 073875255.
If he has not got a part they buy cars 2 times a week from auctoins + private cars . give him a try .
5 daihatsus so far latest f70td ute looks like mini land cruser .
had feroza f310
hijet
mira L200
handi van L80
all ways found him very help full .





I got i n touch with Daiauto and ordered a ball joint. I gave my credit card details and was assured I'd have it within 3 working days. That was last thursday. still no sign of it, so I tried ringing them today. I was on hold listening to crap melbourne radio for 20 mins before I gave up.(STD rates)
Then I checked my online statement and I haven't been billed for it yet.. I wonder whats going on?
I'll try the recyclers at archerfield as soon as I know whats going on with daiauto.
Then I checked my online statement and I haven't been billed for it yet.. I wonder whats going on?

I'll try the recyclers at archerfield as soon as I know whats going on with daiauto.
Who is online
Users browsing this forum: No registered users and 1 guest