Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Body Mounts On 60

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 824
Joined: Mon Jun 16, 2003 5:10 pm
Location: Vic

Body Mounts On 60

Post by bundytunna »

anybody know where the the heads of the bolts are for the body mounts on a 60?
i found the 2 very front ones at the front of the guards and the middle 4 (under the front and rear seats )but i cant find the heads for the bolts at the back of the front guards and for the rear 4(the very rear ones and the ones in the middle of the cargo area?
anybody know where the heads are
is their heads on some of them and captives on the rest or what?????
id really like to know?
tia
BUY MY HILUX PARTS
http://www.outerlimits4x4.com/PHP_Modules/phpBB2/viewtopic.php?t=29889
Posts: 568
Joined: Fri Jan 10, 2003 6:38 pm
Location: Darwin

Post by Sixty »

Two are in the front footwell under a rubber grommet. The very rear ones are hidden behind a plate in the rear 'body support channel'. Cant remember where the last two are, will have a look this arvo if you want.

Al
Luv the sound of a diesel,
especially a Chev 6.2!
Its GONE.........Replaced by a qik HDJ105.

The bigger the boy, the bigger the TOY!!
Posts: 824
Joined: Mon Jun 16, 2003 5:10 pm
Location: Vic

Post by bundytunna »

are any of the heads hard to get to?
i know where all the body mounts are but i cant seem to find some of the bolt heads
the ones in the front footwell is that actually a bolt or is it a captive nut inside the well and u just undo them from the outside
BUY MY HILUX PARTS
http://www.outerlimits4x4.com/PHP_Modules/phpBB2/viewtopic.php?t=29889
Posts: 303
Joined: Tue Aug 05, 2003 11:27 am
Location: Castle Hill

Post by Monty »

All the bolts have nuts on them therefore requiring a socket set on one end and either another socket set or ring spanner. U will need ring spanner for the rear two which are located behind the plate which u need to take out 2 screws that are phillips heads for them to come off before seeing the bolts.

The other two u are missing are probably under the front seats i remeber taking out the seats on both 60s i have done body lifts on.

If u are doing a body lift u will need to put the rear bolts in opposite to the way they came out eg. upside down as u cant fit the bolt through the whole the plate opens
Do not have sexual relations with your father's sister; she is your father's close relative
Leviticus 18:12
Posts: 103
Joined: Fri Dec 19, 2003 10:07 pm
Location: North Coast

Post by TUFF60 »

The last two are in the back cargo area between the wheel arches.Under your carpet there is two rubber gromets about 2 inches in dia. The heads of the bolts are in those holes that are about 3 inches deep. Get a screw driver and dig around in the hole because there usualy full of mud :)
NO EXPECTATIONS, NO DISAPOINTMENTS
Posts: 824
Joined: Mon Jun 16, 2003 5:10 pm
Location: Vic

Post by bundytunna »

thnak you
i just had a mate tell me where they were as well
the front ones in the footwell are spose to be in the drain plugs under rubber seals
thanks again
BUY MY HILUX PARTS
http://www.outerlimits4x4.com/PHP_Modules/phpBB2/viewtopic.php?t=29889
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests