Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Will extractors/exhaust system be much of a power improvmn?
Will extractors/exhaust system be much of a power improvmn?
Hey all,
thinking about have extractors and 2inch sports exhaust fitted on my 1.3 sierra engine.....will there be much of a difference or is there a better way to spend $900 to improve power.
Also if i end up having a 1.6 efi vita engine installed, can i retain any of the exhaust/extractors or will i have to start over???
thinking about have extractors and 2inch sports exhaust fitted on my 1.3 sierra engine.....will there be much of a difference or is there a better way to spend $900 to improve power.
Also if i end up having a 1.6 efi vita engine installed, can i retain any of the exhaust/extractors or will i have to start over???
Quotes
yea i thought that was a bit excessive........after doing some ringing around $800 was the cheapest(some were over $1000.00). i was looking at getting a 4WD mechanic to do it but they are more expensive then your regular exhasut specialits....besides, its not really something that a 4WD specialist needs to do...pretty simple stuff.................does anyone know anywhere in sydney with a bit more of a reasnoable price?????
Posts: 912
Joined: Tue Nov 09, 2004 6:29 pm
Joined: Tue Nov 09, 2004 6:29 pm
Location: {Sydney, Australia or Rio, Brazil Ride: Sierra JXi}
Autospeed did a muffler comparisson test to see what they could gain by swapping out the exhaust from the cat back. The sierra was one of two test vehicles and they said that quite simply that swapping out the mufflers increased noised and reduced very little in backpressure on the stock setup. Save the $900 and put aside for the engine swap. Once thats done and dusted you can do a cat back muffler if you want (extractors on a 1.6l seems like a waste imho)
-[b]Santos[/b][img]http://www.teamswift.net/images/smilies/icon_furious.gif[/img]
Suzuki, Jeep & Toyota Soft tops with welded seams for SALE (PM me)
Suzuki, Jeep & Toyota Soft tops with welded seams for SALE (PM me)
Re: exhaust
Unless you are upgrading the intake and cam, the difference won't be big on the 1.3 as it really needs all three mods to make it really work.reprise wrote:after reading those comments and a quick searc of the bible......looks like i wont bother with the exhaust/extractors.......guess im now saving for a new engine..........thanks for the help people....much appreciated
[quote="4WD Stuff"]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
Don't forget that if you want your extractors and exhaust to increase power, you need to increase the amount of air that goes into the engine as well. I drilled two holes with a hole saw on either side of the air cleaner box (about 2 inches wide) and that helped heaps ! And when I drive across water, I just use PVC pipe plugs the same size as the holes to make everything watertight again.
I got better throttle response, much better top speed and better fuel economy doing all that. Oh, and the sound it makes...
All up, it cost me $190 for the extractors and whatever a Lukey muffler to fit goes for which isn't a fortune. I also bought 3 meters of 2 inch exhaust tube and cut and welded it myself.
Hope this helps !
Cheers,
I got better throttle response, much better top speed and better fuel economy doing all that. Oh, and the sound it makes...
All up, it cost me $190 for the extractors and whatever a Lukey muffler to fit goes for which isn't a fortune. I also bought 3 meters of 2 inch exhaust tube and cut and welded it myself.
Hope this helps !
Cheers,
Froggy
98 Sierra / Samurai
2 inch suspension lift
Warn winch
Lots of "home made" accessories
Oh, and a Mazda BT-50 dual cab ute...
98 Sierra / Samurai
2 inch suspension lift
Warn winch
Lots of "home made" accessories
Oh, and a Mazda BT-50 dual cab ute...
Who is online
Users browsing this forum: No registered users and 1 guest