Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
hello and noisey gearbox
Moderator: Tiny
hello and noisey gearbox
hi everyone, this is my first post on this forum so a big hello to you all. ive pretty much driven my poor feroza into the ground over the past 9 months ive owned it. its a 1996 310 WT. bought it for $3000 knowing it had some oil consumption issues however the biggest problem im facing now is the gearbox rattles under load at aprox 3-5k rpm and some of it can be diminished by holding the gearstick. it still selects all gears really well. Was thinking its probably the shaft bearings giving up and was going to pull it down and replace them. Has anyone else done this and found the shafts are flogged out too or that it isnt the bearings being the problem?and if the shafts are worn can they be repaired or sleeved? thanks in advance!
Who is online
Users browsing this forum: No registered users and 1 guest